Amelioration of Physical Properties and Printability of Paper Coated with N-methylated Chitosan.
Journal
Scientific reports
ISSN: 2045-2322
Titre abrégé: Sci Rep
Pays: England
ID NLM: 101563288
Informations de publication
Date de publication:
18 06 2020
18 06 2020
Historique:
received:
23
02
2020
accepted:
26
05
2020
entrez:
20
6
2020
pubmed:
20
6
2020
medline:
20
6
2020
Statut:
epublish
Résumé
In offset printing process, poor mechanical properties and printability of paper substrate usually result in printing problems, low quality of print and waste of paper materials. Therefore, many researches focus on the quality improvement of paper substrates using suitable additives. In this work, N-methylated chitosan, including N, N-dimethyl chitosan (DMC) and N, N, N-trimethyl chitosan (TMC), were prepared and employed as coating agents to ameliorate the mechanical properties and printability of paper sheets. Analysis results showed that the mechanical strength of coated papers with DMC and TMC were largely improved, because the fibers with negative charges were prone to form electrostatic bonding with the positively charged N-methylated chitosan, thus enhancing paper strength. Particularly, compared with chitosan and DMC, the TMC-coated paper exhibited better mechanical properties, printability and surface properties due to the high cationic charge density of TMC. Therefore, surface coating with TMC is of great benefit to decrease the printing problem of paper sheets and enhance the operation speed in offset printing. This work provides a valuable reference for the amelioration of the printability and physical properties of high-quality paper products for many promising applications.
Identifiants
pubmed: 32555287
doi: 10.1038/s41598-020-66827-8
pii: 10.1038/s41598-020-66827-8
pmc: PMC7303160
doi:
Types de publication
Journal Article
Research Support, Non-U.S. Gov't
Langues
eng
Sous-ensembles de citation
IM
Pagination
9936Références
Mahadeva, S. K., Walus, K. & Stoeber, B. Paper as a platform for sensing applications and other devices: A review. ACS Appl. Mater. Inter 7, 8345–8362 (2015).
doi: 10.1021/acsami.5b00373
Lestiani, R., Batchelor, W. & Banham, P. Effect of paper and printing press variables on the rates of adhesion failure in the linting of offset printing. J. Adhes. Sci. Technol. 28, 1935–1948 (2014).
doi: 10.1080/01694243.2014.929517
Ghasemian, A., Ghaffari, M. & Ashori, A. Strength-enhancing effect of cationic starch on mixed recycled and virgin pulps. Carbohydr. Polym 87, 1269–1274 (2012).
doi: 10.1016/j.carbpol.2011.09.010
Ashori, A., Cordeiro, N., Faria, M. & Hamzeh, Y. Effect of chitosan and cationic starch on the surface chemistry properties of bagasse paper. Int. J Biol. Macromol. 58, 343–348 (2013).
pubmed: 23624167
doi: 10.1016/j.ijbiomac.2013.04.056
Zhang, H., Shi, L. & Feng, X. Use of chitosan to reinforce transparent conductive cellulose nanopaper. J Mater. Chem. C 6, 242–248 (2018).
doi: 10.1039/C7TC03980H
Khwaldia, K., Basta, A. H., Aloui, H. & El-Saied, H. Chitosan-caseinate bilayer coatings for paper packaging materials. Carbohydr. Polym 99, 508–516 (2014).
pubmed: 24274537
doi: 10.1016/j.carbpol.2013.08.086
Zhang, W., Xiao, H. & Qian, L. Beeswax-chitosan emulsion coated paper with enhanced water vapor barrier efficiency. Appl. Surf. Sci. 300, 80–85 (2014).
doi: 10.1016/j.apsusc.2014.02.005
Arboleda, J. C., Niemi, N., Kumpunen, J., Lucia, L. A. & Rojas, O. J. Soy protein-based polyelectrolyte complexes as biobased wood fiber dry strength agents. ACS Sustain. Chem. Eng. 2, 2267–2274 (2014).
doi: 10.1021/sc500399d
Hamzeh, Y., Sabbaghi, S., Ashori, A., Abdulkhani, A. & Soltani, F. Improving wet and dry strength properties of recycled old corrugated carton (OCC) pulp using various polymers. Carbohydr. Polym 94, 577–583 (2013).
pubmed: 23544577
doi: 10.1016/j.carbpol.2013.01.078
Wang, H., Qian, J. & Ding, F. Emerging chitosan-based films for food packaging applications. J. Agric. Food Chem. 66, 395–413 (2018).
pubmed: 29257871
doi: 10.1021/acs.jafc.7b04528
Chen, Q. J., Zhou, L. L., Zou, J. Q. & Gao, X. The preparation and characterization of nanocomposite film reinforced by modified cellulose nanocrystals. Int. J Biol. Macromol. 132, 1155–1162 (2019).
pubmed: 30981769
doi: 10.1016/j.ijbiomac.2019.04.063
Chen, Z., Zhang, H., Song, Z. & Qian, X. Preparation and application of maleic anhydride-acylated chitosan for wet strength improvement of paper. BioResources 8, 3901–3911 (2013).
Nicu, R., Bobu, E. & Desbrieres, J. Chitosan as cationic polyelectrolyte in wet-end papermaking systems. Russe 45, 105–111 (2011).
Aloui, H., Khwaldia, K., Slama, M. B. & Hamdi, M. Effect of glycerol and coating weight on functional properties of biopolymer-coated paper. Carbohydr. Polym 86, 1063–1072 (2011).
doi: 10.1016/j.carbpol.2011.06.026
Wu, M., Sukyai, P., Lv, D., Zhang, F., Wang, P. & Liu, C. et al. Water and humidity-induced shape memory cellulose nanopaper with quick response, excellent wet strength and folding resistance. Chem. Eng. J. 392, 123673–123683 (2020).
doi: 10.1016/j.cej.2019.123673
Bobu, E., Nicu, R., M. Lupei, F. C. & Desbrieres, J. Synthesis and characterization of N-alkyl chitosan for papermaking applications. Cellulose Chem. Technol 45(9-10), 619–625 (2011).
Stawski, D., Sahariah, P., Hjálmarsdóttir, M., Wojciechowska, D., Puchalski, M. & Másson, M. N,N,N-trimethyl chitosan as an efficient antibacterial agent for polypropylene and polylactide nonwovens. J. Tex. I 108, 1041–1049 (2017).
de Britto, D. & Assis, O. B. G. A novel method for obtaining a quaternary salt of chitosan. Carbohydr. Polym 69, 305–310 (2007).
doi: 10.1016/j.carbpol.2006.10.007
Domard, A., Rinaudo, R. & Terrassin, C. New method for the quaternization of chitosan. Int. J. Biol. Macromol. 8, 105–107 (1986).
doi: 10.1016/0141-8130(86)90007-3
Wu, M., Long, Z., Xiao, H. & Dong, C. Preparation of N, N, N-trimethyl chitosan via a novel approach using dimethyl carbonate. Carbohydr. Polym 169, 83–91 (2017).
pubmed: 28504181
doi: 10.1016/j.carbpol.2017.03.043
Das, S., Sharma, P. & Vatsa, R. K. Tracing photoionisation behaviour of methyl iodide in gas phase: From isolated molecule to molecular aggregate. J Photoch. Photobio. C: Photochemistry Reviews 33, 27–53 (2017).
doi: 10.1016/j.jphotochemrev.2017.09.002
Esan, A. O., Adeyemi, A. D. & Ganesan, S. A review on the recent application of dimethyl carbonate in sustainable biodiesel production. J Clean. Prod. 257, 120561 (2020).
doi: 10.1016/j.jclepro.2020.120561
Benediktsdottir, B. E., Baldursson, O. & Masson, M. Challenges in evaluation of chitosan and trimethylated chitosan (TMC) as mucosal permeation enhancers: From synthesis to in vitro application. J Control Release: official journal of the Controlled Release Society 173, 18–31 (2014).
doi: 10.1016/j.jconrel.2013.10.022
Wu, M., Long, Z., Xiao, H. & Dong, C. Recent research progress on preparation and application of N, N, N-trimethyl chitosan. Carbohydr. Res. 434, 27–32 (2016).
pubmed: 27551815
doi: 10.1016/j.carres.2016.08.002
Santos, J. C., Moreno, P. M., Mansur, A. A., Leiro, V., Mansur, H. S. & Pego, A. P. Functionalized chitosan derivatives as nonviral vectors: physicochemical properties of acylated N,N,N-trimethyl chitosan/oligonucleotide nanopolyplexes. Soft matter 11, 8113–8125 (2015).
pubmed: 26335751
doi: 10.1039/C5SM01403D
Goy, R. C., Morais, S. T. B. & Assis, O. B. G. Evaluation of the antimicrobial activity of chitosan and its quaternized derivative on E. coli and S. aureus growth. Rev. Bras. Farmacogn. 26, 122–127 (2016).
doi: 10.1016/j.bjp.2015.09.010
Ristić, T., Zabret, A., Zemljič, L. F. & Peršin, Z. Chitosan nanoparticles as a potential drug delivery system attached to viscose cellulose fibers. Cellulose 24, 739–753 (2016).
doi: 10.1007/s10570-016-1125-5
Chattopadhyay, D. P. & Inamdar, M. S. Studies on the synthesis and application of N,N,N-trimethyl chitosan chloride (TMCHT) on cotton fabric. J Nat. Fibers 12, 341–356 (2015).
doi: 10.1080/15440478.2014.929554
Zhang, X., Xiao, N., Wang, H., Liu, C. & Pan, X. Preparation and characterization of regenerated cellulose film from a solution in lithium bromide molten salt hydrate. Polymers (Basel) 10, 614–627 (2018).
Benediktsdóttir, B. E., Gaware, V. S., Rúnarsson, Ö. V., Jónsdóttir, S., Jensen, K. J. & Másson, M. Synthesis of N,N,N-trimethyl chitosan homopolymer and highly substituted N-alkyl-N,N-dimethyl chitosan derivatives with the aid of di-tert-butyldimethylsilyl chitosan. Carbohydr. Polym 86, 1451–1460 (2011).
doi: 10.1016/j.carbpol.2011.06.007
Lv, D., Du, H., Che, X., Wu, M., Zhang, Y. & Liu, C. et al. Tailored and integrated production of functional cellulose nanocrystals and cellulose nanofibrils via sustainable formic acid hydrolysis: Kinetic study and characterization. ACS Sustain. Chem. Eng. 7, 9449–9463 (2019).
doi: 10.1021/acssuschemeng.9b00714
Xu, T., Xin, M., Li, M., Huang, H., Zhou, S. & Liu, J. Synthesis, characterization, and antibacterial activity of N,O-quaternary ammonium chitosan. Carbohydr. Res. 346, 2445–2450 (2011).
pubmed: 21920510
doi: 10.1016/j.carres.2011.08.002
Kulkarni, A. D., Patel, H. M., Surana, S. J., Vanjari, Y. H., Belgamwar, V. S. & Pardeshi, C. V. Biomaterials based on N,N,N-trimethyl chitosan fibers in wound dressing applications. Int. J. Biol. Macromol. 89, 471–476 (2016).
doi: 10.1016/j.ijbiomac.2016.02.036
Sieval, A. B., Thanoual, M., Kotze, A. F., Verhoef, J. C., Brussee, J. & Junginger, H. E. Preparation and NMR characterization of highly substituted IV-trimethyl chitosan chloride. Carbohydr. Polym. 36, 157–165 (1998).
doi: 10.1016/S0144-8617(98)00009-5
Asasutjarit, R., Theerachayanan, T., Kewsuwan, P., Veeranodha, S., Fuongfuchat, A. & Ritthidej, G. C. Development and evaluation of diclofenac sodium loaded-N-trimethyl chitosan nanoparticles for ophthalmic use. AAPS PharmSciTech 16, 1013–1024 (2015).
pubmed: 25609376
pmcid: 4674645
doi: 10.1208/s12249-015-0290-4
Ramalingam, P. & Ko, Y. T. Enhanced oral delivery of curcumin from N-trimethyl chitosan surface-modified solid lipid nanoparticles: pharmacokinetic and brain distribution evaluations. Pharm. Res. 32, 389–402 (2015).
pubmed: 25082210
doi: 10.1007/s11095-014-1469-1
de Britto, D. & de Assis, O. B. Synthesis and mechanical properties of quaternary salts of chitosan-based films for food application. Int. J. Biol. Macromol. 41, 198–203 (2007).
pubmed: 17399783
doi: 10.1016/j.ijbiomac.2007.02.005
Kulkarni, A. D., Patel, H. M., Surana, S. J., Vanjari, Y. H., Belgamwar, V. S. & Pardeshi, C. V. N,N,N-trimethyl chitosan: An advanced polymer with myriad of opportunities in nanomedicine. Carbohydr. Polym. 157, 875–902 (2017).
pubmed: 27988003
doi: 10.1016/j.carbpol.2016.10.041
Kamel, S., El-Sakhawy, M. & Nada, A. M. A. Mechanical properties of the paper sheets treated with different polymers. Thermochim. Acta 421, 81–85 (2004).
doi: 10.1016/j.tca.2004.03.005
Nada, A. M. A., El-Sakhawy, M., Kamel, S., Eid, M. A. M. & Adel, A. M. Mechanical and electrical properties of paper sheets treated with chitosan and its derivatives. Carbohydr. Polym 63, 113–121 (2006).
doi: 10.1016/j.carbpol.2005.08.028
He, Z., Chowdhury, A., Tong, L., Reynolds, M. & Ni, Y. Cellulose paper-based strapping products for green/sustainable packaging needs. Paper and Biomaterials 4, 54–68 (2019).
Liu, J., Chinga-Carrasco, G., Cheng, F., Xu, W., Willför, S., Syverud, K. et al. Hemicellulose-reinforced nanocellulose hydrogels for wound healing application. Cellulose 23, 3129–3143 (2016).
doi: 10.1007/s10570-016-1038-3
Yang, L., Lu, S., Li, J., Zhang, F. & Cha, R. Nanocrystalline cellulose-dispersed AKD emulsion for enhancing the mechanical and multiple barrier properties of surface-sized paper. Carbohydr. Polym 136, 1035–1040 (2016).
pubmed: 26572444
doi: 10.1016/j.carbpol.2015.10.011
Lee, H. L. & Shin, J. Surface sizing with cationic starch: Its effect on paper quality and papermaking process. Tappi J 1, 34–40 (2002).
Tang, Y., Hu, X., Zhang, X., Guo, D., Zhang, J. & Kong, F. Chitosan/titanium dioxide nanocomposite coatings: Rheological behavior and surface application to cellulosic paper. Carbohydr. Polym. 151, 752–759 (2016).
pubmed: 27474622
doi: 10.1016/j.carbpol.2016.06.023
Liu, K., Chen, L., Huang, L., Ni, Y. & Sun, B. Enhancing antibacterium and strength of cellulosic paper by coating triclosan-loaded nanofibrillated cellulose (NFC). Carbohydr. Polym 117, 996–1001 (2015).
pubmed: 25498727
doi: 10.1016/j.carbpol.2014.10.014
Sothornvit, R. Effect of hydroxypropyl methylcellulose and lipid on mechanical properties and water vapor permeability of coated paper. Food Res. Int. 42, 307–311 (2009).
doi: 10.1016/j.foodres.2008.12.003
Mirmehdi, S., Hein, P. R. G., de Luca Sarantópoulos, C. I. G., Dias, M. V. & Tonoli, G. H. D. Cellulose nanofibrils/nanoclay hybrid composite as a paper coating: Effects of spray time, nanoclay content and corona discharge on barrier and mechanical properties of the coated papers. Food Packaging Shelf 15, 87–94 (2018).
doi: 10.1016/j.fpsl.2017.11.007
Liu, K., Xu, Y., Lin, X., Chen, L., Huang, L., Cao, S. et al. Synergistic effects of guanidine-grafted CMC on enhancing antimicrobial activity and dry strength of paper. Carbohydr. Polym. 110, 382–387 (2014).
pubmed: 24906770
doi: 10.1016/j.carbpol.2014.03.086
Toivonen, M. S., Kurki-Suonio, S., Schacher, F. H., Hietala, S., Rojas, O. J. & Ikkala, O. Water-resistant, transparent hybrid nanopaper by physical cross-linking with chitosan. Biomacromolecules 16, 1062–1071 (2015).
pubmed: 25665073
doi: 10.1021/acs.biomac.5b00145
Lindström, T., Fellers, C., Ankerfors, M. & Nordmark, G. G. On the nature of joint strength of paper - Effect of dry strength agents - Revisiting the Page equation. Nord. Pulp Pap. Res. J 31, 459–468 (2018).
doi: 10.3183/npprj-2016-31-03-p459-468
Sharma, D. K. Effect of paper coating materials on printability. Int. J Sci., Engineering & Computer Technology 6, 48–49 (2016).
Chen, Q., Dong, X., Zhou, L., Zheng, X., Wang, J. & Wang, P. Nanostarch surface coating of lightweight coated paper. BioResources 13, 729–739 (2018).
El-Sherif, H. M., Nasser, A. M., Hussin, A. I., El-Wahab, H. A., Ghazy, M. B. M. & Elsayed, A. E. Tailoring of mechanical properties and printability of coated recycled papers. Polym. Bull. 76, 2965–2990 (2019).
doi: 10.1007/s00289-018-2515-7
Zhang, Z., Zhang, Q., Zhang, M., Huang, R. & Han, Y. Effect of pigment sizing on printability and coating structure of decorative base paper. Nord. Pulp Pap. Res. J 33, 105–112 (2018).
doi: 10.1515/npprj-2018-3005
Long, Z., Wu, M., Peng, H., Dai, L., Zhang, D. & Wang, J. Preparation and oil-resistant mechanism of chitosan/cationic starch oil-proof paper. BioResources 10, 7907–7920 (2015).
doi: 10.15376/biores.10.4.7907-7920
Velychko, O. Zolotukhina & Rozum, T. The improvement of dampening solution for offset printing. Eastern-European Journal of Enterprise Technologies 4, 37 (2016).
doi: 10.15587/1729-4061.2016.74981
Rossitza, S. Offset printing without isopropyl alcohol in damping solution. Energy Procedia 74, 690–698 (2015).
doi: 10.1016/j.egypro.2015.07.804
Kapoor, S. G., Wu, S. M. & Pandit, S. M. New method for evaluating the printing smoothness of coated papers. Tappi J 61, 71–74 (1978).
Verheul, R. J., Amidi, M., van der Wal, S., van Riet, E., Jiskoot, W. & Hennink, W. E. Synthesis, characterization and in vitro biological properties of Omethyl free N,N,N-trimethylated chitosan. Biomaterials 29, 3642–3649 (2008).
pubmed: 18556059
doi: 10.1016/j.biomaterials.2008.05.026
Park, J. H., Cho, Y. W., Chung, H., Kwon, I. C. & Jeong, S. Y. Synthesis and characterization of sugar-bearing chitosan derivatives: Aqueous solubility and biodegradability. Biomacromolecules 4, 1087–1091 (2003).
pubmed: 12857096
doi: 10.1021/bm034094r
Reis, A. B., Yoshida, C. M. P., Reis, A. P. C. & Franco, T. T. Application of chitosan emulsion as a coating on Kraft paper. Polym. Int. 60, 963–969 (2011).
doi: 10.1002/pi.3023
Vartiainen, J., Motion, R., Kulonen, H., Rättö, M., Skyttä, E. & Ahvenainen, R. Chitosan-coated paper: Effects of nisin and different acids on the antimicrobial activity. J Appl. Poly. Sci. 94, 986–993 (2004).
doi: 10.1002/app.20701