Evaluation of a new air water generator based on absorption and reverse osmosis.

The evaluation of a new air water generator (AWG) based on absorption and reverse osmosis is described. For the evaluation, an aqueous lithium bromide solution has been selected from a wide range of liquids as the absorbent. At high salt mass fractions, the aqueous lithium bromide solution has a low vapour pressure and a high osmotic pressure. The low vapour pressure ensures that the water vapour can be absorbed from the air, but the high osmotic pressure leads to high pressures over the membrane. Due to the high osmotic pressures, several reverse osmosis membrane modules are necessary and salt solution has to be present on both sides of the membrane, which leads to an additional inlet on the permeate side. Models for the absorber, the reverse osmosis membrane module and the complete multi-stage reverse osmosis system have been developed in Python. The model of the complete system has then been used to simulate the performance of the AWG at different boundary conditions. The simulations have shown that based on the defined assumptions, extracting water from the air with absorption and reverse osmosis is possible and that the energy demand per litre of pure water is similar to AWG systems which use condensation.

Informations de copyright

© 2020 The Authors.