Development and large volume production of extremely high current density YBa
Journal
Scientific reports
ISSN: 2045-2322
Titre abrégé: Sci Rep
Pays: England
ID NLM: 101563288
Informations de publication
Date de publication:
22 Jan 2021
22 Jan 2021
Historique:
received:
17
09
2020
accepted:
05
01
2021
entrez:
23
1
2021
pubmed:
24
1
2021
medline:
24
1
2021
Statut:
epublish
Résumé
The fusion power density produced in a tokamak is proportional to its magnetic field strength to the fourth power. Second-generation high temperature superconductor (2G HTS) wires demonstrate remarkable engineering current density (averaged over the full wire), J
Identifiants
pubmed: 33483553
doi: 10.1038/s41598-021-81559-z
pii: 10.1038/s41598-021-81559-z
pmc: PMC7822827
doi:
Types de publication
Journal Article
Langues
eng
Sous-ensembles de citation
IM
Pagination
2084Références
Bednorz, J. G. & Mueller, K. A. Possible high T
doi: 10.1007/BF01303701
Yoon, S. et al. 26 T 35 mm all-GdBa
doi: 10.1088/0953-2048/29/4/04LT04
Hahn, S. et al. 45.5-tesla direct-current magnetic field generated with a high-temperature superconducting magnet. Nature 570, 496–499. https://doi.org/10.1038/s41586-019-1293-1 (2019).
doi: 10.1038/s41586-019-1293-1
pubmed: 31189951
Sorbom, B. N. et al. ARC: A compact, high-field, fusion nuclear science facility anddemonstration power plant with demountable magnets. Fusion Eng. Des. 100, 378–405 (2015).
doi: 10.1016/j.fusengdes.2015.07.008
Sykes, A. et al. Compact fusion energy based on the spherical tokamak. Nucl. Fusion 58, 016039 (2018).
doi: 10.1088/1741-4326/aa8c8d
Sundaram, A. et al. 2G HTS wires made on 30 μm thick Hastelloy substrate. Supercond. Sci. Technol. 29, 104007 (2016).
doi: 10.1088/0953-2048/29/10/104007
Usoskin, A., Betz, U., Gnilsen, J., Noll-Baumann, S. & Schlenga, K. Long-length YBCO coated conductors for ultra-high field applications: gaining engineering current density via pulsed laser deposition/alternating beam-assisted deposition route. Supercond. Sci. Technol. 32, 094005 (2019).
doi: 10.1088/1361-6668/ab2cba
Xia, J. et al. Stress and strain analysis of a REBCO high field coil based on the distribution of shielding current. Supercond. Sci. Technol. 32, 095005 (2019).
doi: 10.1088/1361-6668/ab279c
Whyte, D. G. et al. Smaller & sooner: Exploiting high magnetic fields from new superconductors for a more attractive fusion energy development path. J. Fusion Energ. 35, 41–53. https://doi.org/10.1007/s10894-015-0050-1 (2016).
doi: 10.1007/s10894-015-0050-1
Bruzzone, P. et al. High temperature superconductors for fusion magnets. Nucl. Fusion 58, 103001 (2018).
doi: 10.1088/1741-4326/aad835
Wang, X., Gourlay, S. A. & Prestemon, S. O. Dipole magnets above 20 Tesla: Research needs for a path via high-temperature superconducting REBCO conductors. Instruments 3, 62. https://doi.org/10.3390/instruments3040062 (2019).
doi: 10.3390/instruments3040062
Rossi, L. & Tomassini, D. The prospect for accelerator superconducting magnets: HL-LHC and beyond. Rev. Acceler. Sci. Technol. 10, 157–187. https://doi.org/10.1142/S1793626819300093 (2019).
doi: 10.1142/S1793626819300093
Kirby, G. et al. Status of the demonstrator magnets for the EuCARD-2 future magnets project. IEEE Trans. Appl. Supercond. 26, 4003307 (2016).
doi: 10.1109/TASC.2016.2528544
Parizh, M., Lvovsky, Y. & Sumption, M. Conductors for commercial MRI magnets beyond NbTi: Requirements and challenges. Supercond. Sci. Technol. 30, 14007 (2017).
doi: 10.1088/0953-2048/30/1/014007
Maeda, H. & Yanagisawa, Y. Future prospects for NMR magnets: A perspective. J. Magn. Reson. 306, 80–8583 (2019).
pubmed: 31337560
doi: 10.1016/j.jmr.2019.07.011
https://ir.bruker.com/press-releases/press-release-details/2019/Bruker-Announces-Worlds-First-12-GHz-High-Resolution-Protein-NMR-Data/default.aspx
Schael, S. et al. AMS-100: The next generation magnetic spectrometer in space—an international science platform for physics and astrophysics at Lagrange point 2. Nuclear Inst. Methods Phys. Res. A 944, 162561 (2019).
doi: 10.1016/j.nima.2019.162561
Z. Hartwig, SPARC: The High-field Path to Fusion Energy, presented at ICMC-2019, 21–25 July 2019, Hartford CT, USA
V Matias, R H Hammond, HTS superconductor wire: $5/kAm by 2030? Presented at CCA 2014 (Seoul, Korea, 30 November–3 December), 2014
Yasukawa, Y., Nakane, T., Yamauchi, H. & Karppinen, M. Consequence of isovalent rare earth substitution to magnetic irreversibility in cation-stoichiometric CuBa2RECu2O693±001. Appl. Phys. Lett. 78, 2917 (2001).
doi: 10.1063/1.1370990
Foltyn, S. R. et al. Materials science challenges for high-temperature superconducting wire. Nat. Mater. 6, 631–642 (2007).
pubmed: 17767181
doi: 10.1038/nmat1989
Maiorov, B. et al. Synergetic combination of different types of defect to optimize pinning landscape using BaZrO
doi: 10.1038/nmat2408
Wee, S. H., Zuev, Y. L., Cantoni, C. & Goyal, A. Engineering nanocolumnar defect configurations for optimized vortex pinning in high temperature superconducting nanocomposite wires. Nat. Sci. Rep. 3, 2310 (2013).
Matsumoto, K. & Mele, P. Artificial pinning center technology to enhance vortex pinning in YBCO coated conductors. Supercond. Sci. Technol. 23, 014001 (2010).
doi: 10.1088/0953-2048/23/1/014001
Feighan, J. P. F., Kursumovic, A. & MacManus-Driscoll, J. L. Materials design for artificial pinning centres in superconductor PLD coated conductors. Supercond. Sci. Technol. 30, 123001 (2017).
doi: 10.1088/1361-6668/aa90d1
Francis, A. et al. Development of general expressions for the temperature and magnetic field dependence of the critical current density in coated conductors with variable properties. Supercond. Sci. Technol. 33, 044011 (2020).
doi: 10.1088/1361-6668/ab73ee
Rossi, L. et al. Sample and length-dependent variability of 77 and 4.2 K propertiess in nominally identical RE123 coated conductors. Supercond. Sci. Technol. 29, 054006 (2016).
doi: 10.1088/0953-2048/29/5/054006
Fujita, S. et al. Flux-pinning properties of BaHfO
doi: 10.1109/TASC.2019.2896535
Chepikov, V. et al. Introduction of BaSnO3 and BaZrO3 artificial pinning centres into 2G HTS wires based on PLD-GdBCO films. Phase I of the industrial R&D programme at SuperOx Supercond. Sci. Technol. 30, 124001 (2017).
Fujita, S. et al. Flux-pinning properties of BaHfO
doi: 10.1109/TASC.2019.2896535
Hazelton, D. W. Progress of 2G HTS conductor development and process improvement at superpower. presented at ASC 2018, Seattle WA, USA
Shanghai Superconductor Technologies commercial leaflet distributed at EUCAS-2019, 1–5 September 2019, Glasgow, UK
Jiang, G. et al. Recent development and mass production of high Je 2G-HTS tapes by using thin hastelloy substrate at shanghai superconductor technology. Supercond Sci. Technol https://doi.org/10.1088/1361-6668/ab90c4 (2020).
doi: 10.1088/1361-6668/ab90c4
Fujikura web site http://www.fujikura.co.jp/eng/products/newbusiness/superconductors/01
Lee, S. et al. Development and production of second generation high T
doi: 10.1088/0953-2048/27/4/044022
Samoilenkov, S. et al. Customised 2G HTS wire for applications. Supercond. Sci. Technol. 29, 024001 (2016).
doi: 10.1088/0953-2048/29/2/024001
Markelov, A. et al. 2G HTS wire with enhanced engineering current density attained through the deposition of HTS layer with increased thickness. Progr. Superconduct. Cryogen. 21(4), 29–33 (2019).
Abraimov, D. et al. Double disordered YBCO coated conductors of industrial scale: high currents in high magnetic field. Supercond. Sci. Technol. 28, 114007 (2015).
doi: 10.1088/0953-2048/28/11/114007
Majkic, G. et al. Engineering current density over 5 kA/mm2 at 42 K, 14 T in thick film REBCO tapes. Supercond. Sci. Technol. 31(10), 1 (2018).
doi: 10.1088/1361-6668/aad844
Galstyan, E. et al. In-Field critical current and pinning mechanisms at 4.2 K of Zr-added REBCO coated conductors. Supercond. Sci. Technol. 2, 2. https://doi.org/10.1088/1361-6668/ab90c6 (2020).
doi: 10.1088/1361-6668/ab90c6
Majkic, G. et al. In-field critical current performance of 40 μm thick film REBCO conductor with Hf addition at 42 K and fields up to 312 T. Supercond. Sci. Technol. 2, 2. https://doi.org/10.1088/1361-6668/ab9541 (2020).
doi: 10.1088/1361-6668/ab9541
Braccini, V. et al. Properties of recent IBAD-MOCVD coated conductors relevant to their high field, low temperature magnet use. Supercond. Sci. Technol. 24, 035001 (2011).
doi: 10.1088/0953-2048/24/3/035001
Xu, A., Jaroszynski, J., Kametani, F. & Larbalestier, D. Broad temperature range study of J
doi: 10.1063/1.4907891
Nelson, D. R. & Vinokur, V. M. Boson localization and correlated pinning of superconducting vortex arrays. Phys. Rev. B 48(17), 1360–13097 (1993).
doi: 10.1103/PhysRevB.48.13060
Zhang, S. et al. Broad temperature study of RE-substitution effects on the in-field critical current behavior of REBCO superconducting tapes. Supercond. Sci. Technol. 31, 125006 (2018).
doi: 10.1088/1361-6668/aae460
Samoylenkov, S. V., Yu, O. & Gorbenko and A. R. Kaul, ,. An analysis of charge carriers distribution in RBa
doi: 10.1016/S0921-4534(97)00111-1
Ovcharov, A. V. et al. Microstructure and superconducting properties of high-rate PLD-derived GdBa
doi: 10.1038/s41598-019-51348-w
pubmed: 31645586
pmcid: 6811553
Samoylenkov, S. V. et al. Secondary Phases in (001)RBa
doi: 10.1021/cm991016v
Mankevich, A. et al. Quality management in production of textured templates for 2G HTS wire. IEEE Trans. Appl. Supercond. 28(4), 6602005 (2018).
doi: 10.1109/TASC.2018.2806396
Kim, H. et al. Ultra-high performance, high-temperature superconducting wires via cost-effective, scalable co-evaporation process. Sci Rep 4, 4744 (2015).
doi: 10.1038/srep04744
Durrschnabel, M. et al. DyBa
doi: 10.1088/0953-2048/25/10/105007
A. Mankevich, V. Chepikov, A. Makarevich, Method for gravimetrical determination of the thickness of superconductor layer in second generation high temperature superconductor wire, Russian Patent 2687312, 2019
Long, N. J., Mataira, R. C., Talantsev, E. & Badcock, R. A. Mode I delamination testing of REBCO coated conductors via climbing drum peel test. IEEE Trans. Appl. Supercond. 28(4), 6600705 (2018).
doi: 10.1109/TASC.2018.2791514
Strickland, N. M., Hoffmann, C. & Wimbush, S. C. A 1 kA-class cryogen-free critical current characterization system for superconducting coated conductors. Rev. Sci. Instrum. 85(11), 113907. https://doi.org/10.1063/1.4902139 (2014).
doi: 10.1063/1.4902139
pubmed: 25430124
Zhang, X., Zhong, Z., Ruiz, H. S., Geng, J. & Coombs, T. A. General approach for the determination of the magneto-angular dependence of the critical current of YBCO coated conductors. Supercond. Sci. Technol. 30, 025010 (2017).
doi: 10.1088/1361-6668/30/2/025010
Awaji, S. et al. Repairing and upgrading of the HTS insert in the 18 T cryogen-free superconducting magnet. Adv. Cryo. Eng. 59, 732–738 (2014).
Awaji, S. et al. First performance test of a 25 T cryogen-free superconducting magnet. Supercond. Sci. Technol. 30, 065001 (2017).
doi: 10.1088/1361-6668/aa6676
Barth, C., Bonura, M. & Senatore, C. High current probe for Ic(B, T) measurements with ±0.01 K precision: HTS current leads and active temperature stabilization system. IEEE Trans. Appl. Supercond. 28(4), 9500206 (2018).
doi: 10.1109/TASC.2018.2794199
On-line database of lift-factors of SuperOx YBCO and GdBCO 2G HTS wire http://www.s-innovations.ru/upload/SuperOx%20wire%20for%20in-field%20use%20vs%20wire%20for%20LN2.xlsx