Exploitation of seawater for cotton and polyester fabrics colouration.

Colour difference Colour fastness Ground water Seawater Water consumption

Journal

Heliyon
ISSN: 2405-8440
Titre abrégé: Heliyon
Pays: England
ID NLM: 101672560

Informations de publication

Date de publication:
May 2021
Historique:
received: 10 02 2021
revised: 18 04 2021
accepted: 10 05 2021
entrez: 27 5 2021
pubmed: 28 5 2021
medline: 28 5 2021
Statut: epublish

Résumé

Water is the ultimate and mostly used media during textile materials processing, especially in colouration. This study investigated the possibilities of using seawater for cotton and polyester fabrics dyeing. Single jersey fabrics made of 100 percent cotton and polyester were dyed using a standard recipe and two separate water source as dyeing mediums. It has been focused on the assessment of colour fastness to wash, perspiration, saliva, rubbing, water, light and colour difference value due to compare the efficiency of dyeing media. The results revealed that the cotton fabric dyed with seawater showed lighter shade than that of ground water sample. But for polyester fabric darker shade was obtained compared to ground water. The cotton sample dyed with sea water carried about 15% higher colour strength than ground water dyed sample but for polyester it was very negligible, only 3%. Moreover, the results of colour fastness to wash, perspiration, saliva, rubbing, water and light for seawater dyed samples of cotton and polyester were shown satisfactory outcomes having the grading of 4-5 in most of the cases. This exploration established that commercial dyeing processes were robust and can be practically transferable into the seawater medium for cotton and polyester fabrics.

Identifiants

pubmed: 34041402
doi: 10.1016/j.heliyon.2021.e07059
pii: S2405-8440(21)01162-2
pmc: PMC8141466
doi:

Types de publication

Journal Article

Langues

eng

Pagination

e07059

Informations de copyright

© 2021 The Author(s).

Déclaration de conflit d'intérêts

The authors declare no conflict of interest.

Références

Water Res. 2009 May;43(9):2317-48
pubmed: 19371922

Auteurs

Md Rezaul Karim (MR)

Department of Textile Engineering, Port City International University, Chittagong, 4202, Bangladesh.

Tarikul Islam (T)

Department of Textile Engineering, Jashore University of Science and Technology, Jashore, 7408, Bangladesh.

Md Reazuddin Repon (MR)

ZR Research Institute for Advanced Materials, Sherpur, 2100, Bangladesh.
Department of Textile Engineering, Khwaja Yunus Ali University, Sirajgang, 6751, Bangladesh.
Department of Production Engineering, Faculty of Mechanical Engineering and Design, Kaunas University of Technology, Studentu 56, LT-51424, Kaunas, Lithuania.

Abdullah Al Hamim (A)

Department of Textile Engineering, Port City International University, Chittagong, 4202, Bangladesh.

Muhammad Abdur Rashid (MA)

Department of Textile Engineering, Dhaka University of Engineering and Technology, Gazipur, 1700, Bangladesh.

Mohammad Abdul Jalil (MA)

Department of Textile Engineering, Khulna University of Engineering and Technology, Khulna, 9203, Bangladesh.

Classifications MeSH