NEURAP-A Dedicated Neutron-Imaging Facility for Highly Radioactive Samples.

NEURAP NEUTRA SINQ—Swiss spallation neutron source lead neutron-imaging nuclear fuel radioactive specimen radiography spallation target zircaloy

Journal

Journal of imaging
ISSN: 2313-433X
Titre abrégé: J Imaging
Pays: Switzerland
ID NLM: 101698819

Informations de publication

Date de publication:
16 Mar 2021
Historique:
received: 18 02 2021
revised: 09 03 2021
accepted: 12 03 2021
entrez: 30 8 2021
pubmed: 31 8 2021
medline: 31 8 2021
Statut: epublish

Résumé

NEURAP is a dedicated set-up at the Swiss neutron spallation source (SINQ) at the Paul Scherrer Institut (PSI), optionally implemented as a special configuration of the neutron-imaging station NEUTRA. It is one of very few instrumentations available worldwide enabling neutron-imaging of highly radioactive samples to be performed routinely, with special precautions and following a specific procedure. Since the relevant objects are strong γ-sources, dedicated techniques are needed to handle the samples and to perform neutron-imaging despite the radiation background. Dysprosium (Dy)-loaded imaging plates, effectively made sensitive to neutrons only, are employed. Neutrons are captured by Dy during neutron irradiation. Then the imaging plate is erased removing gamma detections. A subsequent relatively long self-exposure by the radiation from the intrinsic neutron-activated Dy within the imaging plate yields the neutron-only radiograph that is finally read out. During more than 20 years of NEURAP operation, images have been obtained for two major applications: (a) highly radioactive SINQ target components were investigated after long-term operation life; and (b) spent fuel rods and their cladding from Swiss nuclear power plants were characterized. Quantitative analysis of the image data demonstrated the accumulation of spallation products in the lead filled "Cannelloni" Zircaloy tubes of the SINQ target and the aggregation of hydrogen at specific sites in used fuel pins of power plants and their cladding, respectively. These results continue to help understanding material degradation and optimizing the operational regimes, which might lead to extending the safe lifetimes of these components.

Identifiants

pubmed: 34460713
pii: jimaging7030057
doi: 10.3390/jimaging7030057
pmc: PMC8321289
pii:
doi:

Types de publication

Journal Article Review

Langues

eng

Références

Rev Sci Instrum. 2020 May 1;91(5):056103
pubmed: 32486743

Auteurs

Eberhard Lehmann (E)

Laboratory for Neutron Scattering and Imaging, Paul Scherrer Institute, 5232 Villigen, Switzerland.

Knud Thomsen (K)

Laboratory for Neutron Scattering and Imaging, Paul Scherrer Institute, 5232 Villigen, Switzerland.

Markus Strobl (M)

Laboratory for Neutron Scattering and Imaging, Paul Scherrer Institute, 5232 Villigen, Switzerland.

Pavel Trtik (P)

Laboratory for Neutron Scattering and Imaging, Paul Scherrer Institute, 5232 Villigen, Switzerland.

Johannes Bertsch (J)

Laboratory for Nuclear Materials, Paul Scherrer Institute, 5232 Villigen, Switzerland.

Yong Dai (Y)

Laboratory for Nuclear Materials, Paul Scherrer Institute, 5232 Villigen, Switzerland.

Classifications MeSH