An experimental investigation of the mechanical performance of PLLA wire-braided stents.


Journal

Journal of the mechanical behavior of biomedical materials
ISSN: 1878-0180
Titre abrégé: J Mech Behav Biomed Mater
Pays: Netherlands
ID NLM: 101322406

Informations de publication

Date de publication:
02 2023
Historique:
received: 30 03 2022
revised: 09 11 2022
accepted: 11 11 2022
pubmed: 3 12 2022
medline: 19 1 2023
entrez: 2 12 2022
Statut: ppublish

Résumé

Much of our current understanding of the performance of self-expanding wire-braided stents is based on mechanical testing of Nitinol-based or polymeric non-bioresorbable (e.g. PET, PP etc.) devices. The small amount of data present for bioresorbable devices characterizes stents with big nominal diameters (D>6mm), with a distinct lack of data describing the mechanical performance of small-diameter wire-braided bioresorbable devices (D≤5mm). This study presents a systematic investigation of the mechanical performance of wire-braided bioresorbable Poly-L-Lactic Acid (PLLA) stents having different braiding angles (α=45° , α=30°, and α=20°), wire diameters (d=100μm, and d=150μm), wire count (n=24 and n=48), braiding patterns (1:1-1, 2:2-1 and 1:1-2) and stent diameters (D=5mm, D=4mm, and D=2.5mm). Mechanical characterisation was carried out by evaluating the radial, longitudinal and bending response of the devices. Our results showed that smaller braid angles, larger wire diameters, higher number of wires and smaller stent diameter led to an increase in the stent mechanical properties across each of the three mechanical tests performed. It was found that geometrical features of a polymeric braided stent could be adapted to achieve a similar performance to the one of a metallic device. In particular, substantial increases in stent mechanical properties were found for a low braiding angle and when the braiding pattern followed a one-over-one-under configuration with two wires in parallel (1:1-2). Finally, it was shown that a mathematical model proposed in literature for metal braided stents can provide reasonable predictions also of polymeric stent performance but just in circumstances where wire friction does not have a dominant role. This study presents a wide range of experimental data that can provide an important reference for further development of wire-braided bioresorbable devices.

Identifiants

pubmed: 36459705
pii: S1751-6161(22)00473-8
doi: 10.1016/j.jmbbm.2022.105568
pii:
doi:

Substances chimiques

poly(lactide) 459TN2L5F5
Polyesters 0
Polymers 0

Types de publication

Journal Article Research Support, Non-U.S. Gov't

Langues

eng

Sous-ensembles de citation

IM

Pagination

105568

Informations de copyright

Copyright © 2022 Elsevier Ltd. All rights reserved.

Déclaration de conflit d'intérêts

Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:Ted J. Vaughan reports financial support was provided by EU Framework Programme for Research and Innovation Marie Sklodowska-Curie Actions.

Auteurs

Agnese Lucchetti (A)

Institut für Textiltechnik of RWTH Aachen University, Germany.

Caroline Emonts (C)

Institut für Textiltechnik of RWTH Aachen University, Germany.

Akram Idrissi (A)

Institut für Textiltechnik of RWTH Aachen University, Germany.

Thomas Gries (T)

Institut für Textiltechnik of RWTH Aachen University, Germany.

Ted J Vaughan (TJ)

Biomechanics Research Centre (BioMEC), School of Engineering, College of Science and Engineering, University of Galway, Ireland. Electronic address: ted.vaughan@universityofgalway.ie.

Articles similaires

Vancomycin Polyesters Anti-Bacterial Agents Models, Theoretical Drug Liberation
Semiconductors Photosynthesis Polymers Carbon Dioxide Bacteria
1.00
Iran Environmental Monitoring Seasons Ecosystem Forests
Cities China Government Conservation of Natural Resources Humans

Classifications MeSH