Ideal Length and Diameter for Intramedullary Screw Fixation of Metacarpal Fractures: A Biomechanical Study.

This biomechanical study evaluated the effect of intramedullary screw diameter and length relative to 3-point bending force and torsional force when used to stabilize metacarpal shaft fractures. Transverse osteotomies were made in the proximal metacarpal shaft in 36 middle finger metacarpal fourth-generation composite Sawbones. To compare screw diameters, antegrade intramedullary screws of 30-mm length were placed in 6 metacarpals, which included 4.7-mm Acutrak 2, Standard Acutrak 2 (4.0 mm), and Mini-Acutrak 2 (3.5 mm) screws. To compare screw lengths, metacarpals were fixated with Standard Acutrak 2 screws of 26, 30, or 34 mm in length, with screw tips bypassing the osteotomy by 6, 10, or 14 mm, respectively. A 6 degrees of freedom robot was used for torsional and 3-point bending testing. Increasing screw diameter demonstrated significant differences in both 3-point bending and torsional strengths. Maximum torsional loads were 69 Ncm (4.7-mm Acutrak 2), 45 Ncm (Standard Acutrak 2), and 27 Ncm (Mini-Acutrak 2) ( The results demonstrated significantly higher torsional strength and resistance to 3-point bending with larger intramedullary screw diameters. Further, when selecting the intramedullary screw length, the screw tip should pass at least 10 mm beyond the fracture. This study provided biomechanical evidence to guide surgeons in selecting intramedullary screw diameter and length for treating metacarpal fractures.

Informations de copyright

© 2022 The Authors.