Oily cold rolling mill sludge conditioned by quicklime to improve dewatering performance: optimization and mechanism study.
Conditioning agent
Oily cold rolling mill sludge
Quicklime
Recycling
Response surface methodology
Journal
Environmental science and pollution research international
ISSN: 1614-7499
Titre abrégé: Environ Sci Pollut Res Int
Pays: Germany
ID NLM: 9441769
Informations de publication
Date de publication:
Aug 2023
Aug 2023
Historique:
received:
15
02
2023
accepted:
21
06
2023
medline:
24
8
2023
pubmed:
20
7
2023
entrez:
20
7
2023
Statut:
ppublish
Résumé
Dewatering is critical to oily cold rolling mill (CRM) sludge treatment. Therefore, finding an efficient, energy-saving, and applicable dewatering technology for oily CRM sludge is still urgent. This study investigated the performance of quicklime as a conditioning agent for oily CRM sludge conditioning and dewatering. The interactive effects of quicklime dosage, temperature, and time on filter cake's specific resistance to filtration (SRF) and the dewatering rate of oily CRM sludge were studied by response surface methodology (RSM). The optimal parameters for conditioning oily CRM sludge were quicklime dosage of 18.7%, temperature of 54 °C, and time of 43.3 min, which resulted in filter cake SRF of 0.50 × 10
Identifiants
pubmed: 37470976
doi: 10.1007/s11356-023-28430-y
pii: 10.1007/s11356-023-28430-y
doi:
Substances chimiques
Sewage
0
lime
C7X2M0VVNH
Oxides
0
Calcium Compounds
0
Oils
0
Water
059QF0KO0R
Types de publication
Journal Article
Langues
eng
Sous-ensembles de citation
IM
Pagination
91125-91139Subventions
Organisme : National Key R&D Program
ID : 2018YFC1900605
Informations de copyright
© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.
Références
Abdulhameed AS, Firdaus Hum NNM, Rangabhashiyam S, Jawad AH, Wilson LD, Yaseen ZM, Al-Kahtani AA, Alothman ZA (2021) Statistical modeling and mechanistic pathway for methylene blue dye removal by high surface area and mesoporous grass-based activated carbon using K2CO3 activator. J Environ Chem Eng 9:105530
doi: 10.1016/j.jece.2021.105530
Abdulhameed AS, Mohammad A-T, Jawad AH (2019) Modeling and mechanism of reactive orange 16 dye adsorption by chitosan-glyoxal/TiO2 nanocomposite: application of response surface methodology. Desalin Water Treat 164:346–360
doi: 10.5004/dwt.2019.24384
Babu BG, Princewinston D, Padmanaban VC, Sherief GAL, Sankar MK, Bhaskar PVA (2021) Optimization Studies on improving the dielectric properties of alkali treated fibers from phaseolus vulgaris reinforced polyester composites by central composite design. J Nat Fibers 18:1650–1660
doi: 10.1080/15440478.2019.1697985
Baroutian S, Eshtiaghi N, Gapes DJ (2013) Rheology of a primary and secondary sewage sludge mixture: dependency on temperature and solid concentration. Bioresource Technol 140:227–233
doi: 10.1016/j.biortech.2013.04.114
Bennett, M., Sheehy, A., Evans, E., Jones, D., Beeby, J., 1993. Treatment and disposal of oily wastewater and sludges, Mcmaster Symposium 21, Canada.
Bhattacharyya JK, Shekdar AV (2003) Treatment and disposal of refinery sludges: Indian scenario. Waste Manag Res 21:249–261
doi: 10.1177/0734242X0302100309
Biswal BK, Tiwari SN, Mukherji S (2009) Biodegradation of oil in oily sludges from steel mills. Bioresource Technol 100:1700–1703
doi: 10.1016/j.biortech.2008.09.037
Boynton RS (1980) Chemistry and technology of lime and limestone, 2nd edn. John Wiley & Sons, New York
Bridle T, Unkovich I (2002) Critical factors for sludge pyrolysis in Australia. Water(Australia) 29:43–48
Buyukkamaci N, Kucukselek E (2007) Improvement of dewatering capacity of a petrochemical sludge. J Hazard Mater 144:323–327
doi: 10.1016/j.jhazmat.2006.10.034
Conner JR, Hoeffner SL (1998) A critical review of stabilization/solidification technology. Crit Rev Environ Sci Technol 28:397–462
doi: 10.1080/10643389891254250
Duval L (1994) Converting oily mill scale and sludge to usable products. In: Conference on Extraction and Processing for the Treatment and Minimization of Wastes, San Francisco; Minerals, Metals and Materials Society, United States
Fonts I, Gea G, Azuara M, Ábrego J, Arauzo J (2012) Sewage sludge pyrolysis for liquid production: a review. Renewable Sustainable Energy Rev 16:2781–2805
doi: 10.1016/j.rser.2012.02.070
Gurukarthik Babu B, Princewinston D, Padmanaban VC, Lathief Sherief GA, Kiruba Sankar M, Aravind Bhaskar PV (2021) Optimization studies on improving the dielectric properties of alkali treated fibers from phaseolus vulgaris reinforced polyester composites by central composite design. J Nat Fibers 18:1650–1660
doi: 10.1080/15440478.2019.1697985
Gussoni M, Greco F, Bonazzi F, Vezzoli A, Botta D, Dotelli G, Natali Sora I, Pelosato R, Zetta L (2004) 1H NMR spin-spin relaxation and imaging in porous systems: an application to the morphological study of white portland cement during hydration in the presence of organics. Magn Reson Imaging 22:877–889
doi: 10.1016/j.mri.2004.01.068
Hu G, Li J, Zeng G (2013) Recent development in the treatment of oily sludge from petroleum industry: a review. J Hazard Mater 261:470–490
doi: 10.1016/j.jhazmat.2013.07.069
Iluţiu-Varvara D-A, Aciu C, Maria Mârza C, Sas-Boca IM, Tintelecan M (2018) Assessment of recycling potential of the oily mill scale in the steelmaking industry. Procedia Manuf 22:228–232
doi: 10.1016/j.promfg.2018.03.035
Jawad AH, Abdulhameed AS, Hanafiah MAKM, Alothman ZA, Khan MR, Surip SN (2021a) Numerical desirability function for adsorption of methylene blue dye by sulfonated pomegranate peel biochar: modeling, kinetic, isotherm, thermodynamic, and mechanism study. Korean J Chem Eng 38:1499–1509
doi: 10.1007/s11814-021-0801-9
Jawad AH, Mohammed IA, Abdulhameed AS (2020) Tuning of fly ash loading into chitosan-ethylene glycol diglycidyl ether composite for enhanced removal of reactive red 120 dye: optimization using the Box–Behnken design. J Polym Environ 28:2720–2733
doi: 10.1007/s10924-020-01804-w
Jawad AH, Saud Abdulhameed A, Wilson LD, Syed-Hassan SSA, Alothman ZA, Rizwan Khan M (2021b) High surface area and mesoporous activated carbon from KOH-activated dragon fruit peels for methylene blue dye adsorption: optimization and mechanism study. Chin J Chem Eng 32:281–290
doi: 10.1016/j.cjche.2020.09.070
Jirasripongpun K (2002) The characterization of oil-degrading microorganisms from lubricating oil contaminated (scale) soil. Lett Appl Microbiol 35:296–300
doi: 10.1046/j.1472-765X.2002.01184.x
Kalderis D, Tsolaki E, Antoniou C, Diamadopoulos E (2008) Characterization and treatment of wastewater produced during the hydro-metallurgical extraction of germanium from fly ash. Desalination 230:162–174
doi: 10.1016/j.desal.2007.11.023
Karamalidis AK, Voudrias EA (2007) Cement-based stabilization/solidification of oil refinery sludge: leaching behavior of alkanes and PAHs. J Hazard Mater 148:122–135
doi: 10.1016/j.jhazmat.2007.02.032
Knocke WR, Dishman CM, Miller GF (1993) Measurement of chemical sludge floc density and implications related to sludge dewatering. Water Environ Res 65:735–743
doi: 10.2175/WER.65.6.5
Kriipsalu M, Marques M, Nammari DR, Hogland W (2007) Bio-treatment of oily sludge: the contribution of amendment material to the content of target contaminants, and the biodegradation dynamics. J Hazard Mater 148:616–622
doi: 10.1016/j.jhazmat.2007.03.017
Leonard SA, Stegemann JA (2010) Stabilization/solidification of petroleum drill cuttings. J Hazard Mater 174:463–472
doi: 10.1016/j.jhazmat.2009.09.075
Li H, Xie B, Zhu X, Li Q, Yang J (2023) Erosion behaviour of rotary kiln refractory and its effects on ringing during steel-rolling oily sludge incineration. Waste Manage 164:162–170
doi: 10.1016/j.wasman.2023.04.005
Liu J, Jiang X, Zhou L, Han X, Cui Z (2009) Pyrolysis treatment of oil sludge and model-free kinetics analysis. J Hazard Mater 161:1208–1215
doi: 10.1016/j.jhazmat.2008.04.072
Liu J, Yang F, Xia J, Wu F, Pu C (2021) Mechanism of ultrasonic physical–chemical viscosity reduction for different heavy oils. ACS Omega 6:2276–2283
doi: 10.1021/acsomega.0c05585
Liu W, Luo Y, Teng Y, Li Z, Ma LQ (2010) Bioremediation of oily sludge-contaminated soil by stimulating indigenous microbes. Environ Geochem Health 32:23–29
doi: 10.1007/s10653-009-9262-5
Malviya R, Chaudhary R (2006) Factors affecting hazardous waste solidification/stabilization: a review. J Hazard Mater 137:267–276
doi: 10.1016/j.jhazmat.2006.01.065
Marin JA, Hernandez T, Garcia C (2005) Bioremediation of oil refinery sludge by landfarming in semiarid conditions: influence on soil microbial activity. Environ Res 98:185–195
doi: 10.1016/j.envres.2004.06.005
Mohajeri S, Aziz HA, Isa MH, Zahed MA, Adlan MN (2010) Statistical optimization of process parameters for landfill leachate treatment using electro-Fenton technique. J Hazard Mater 176:749–758
doi: 10.1016/j.jhazmat.2009.11.099
Nair AT, Ahammed MM (2014) Coagulant recovery from water treatment plant sludge and reuse in post-treatment of UASB reactor effluent treating municipal wastewater. Environ Sci Pollut R 21:10407–10418
doi: 10.1007/s11356-014-2900-1
Nair AT, Ahammed MM (2015) The reuse of water treatment sludge as a coagulant for post-treatment of UASB reactor treating urban wastewater. J Clean Prod 96:272–281
doi: 10.1016/j.jclepro.2013.12.037
Novak JT, O'Brien JH (1975) Polymer conditioning of chemical sludges. Journal (Water Pollution Control Federation) 47:2397–2410
Rho HS, Arafat HA, Kountz B, Buchanan RC, Pinto NG, Bishop PL (2001) Decomposition of hazardous organic materials in the solidification/stabilization process using catalytic-activated carbon. Waste Manage 21:343–356
doi: 10.1016/S0956-053X(00)00080-5
Rong H, Yuan J, Feng Y, Yi Y, Chang Z (2022) A TG-IR study on the co-pyrolysis characteristics of oily sludge and crops. Biomass Convers Biorefin 12:5153–5163
doi: 10.1007/s13399-020-00969-7
Sankaran S, Pandey S, Sumathy K (1998) Experimental investigation on waste heat recovery by refinery oil sludge incineration using fluidised-bed technique. J Environ Sci Health, Part A 33:829–845
doi: 10.1080/10934529809376764
Schwarz A (1982) Process of deoiling and agglomerating oil-bearing mill-scale. Google Patents, USA
Tang Q, Xing J, Sun Z, Gan M, Fan X, Ji Z, Huang X, Yang R (2022) Enhancing the dewaterability of oily cold rolling mill sludge using quicklime as a conditioning agent. ACS Omega 7(48):44278–44286
doi: 10.1021/acsomega.2c05771
Un UT, Kandemir A, Erginel N, Ocal SE (2014) Continuous electrocoagulation of cheese whey wastewater: an application of Response Surface Methodology. J Environ Manage 146:245–250
doi: 10.1016/j.jenvman.2014.08.006
Van Order R, Lindwall H (1942) Indole. Chemical Rev 30:69–96
doi: 10.1021/cr60095a004
Xu YM, Dabros T, Kan JM (2008) Filterability of oil sands tailings. Process Saf Environ 86:268–276
doi: 10.1016/j.psep.2008.04.005
Xue Q, Chen YJ (2015) Experimental study on municipal sludge dewatering capacity by using quicklime and slag. Desalin Water Treat 54:1499–1506
Yulei L (2018) Effects and mechanism study on the removal of thallium, indole from water and treatment of sewage sludge by preparing potassium ferrat. Harbin Institute of Technology
Zall J, Galil N, Rehbun M (1987) Skeleton builders for conditioning oily sludge. Journal (Water Pollution Control Federation) 59:699–706
Zhao YQ (2006) Involvement of gypsum (CaSO
doi: 10.1080/01496390600785558
Zhou YB, Hallis SA, Vitko T, Suffet IH (2016) Identification, quantification and treatment of fecal odors released into the air at two wastewater treatment plants. J Environ Manage 180:257–263
doi: 10.1016/j.jenvman.2016.05.046