Safety assessment of the process Novatex, based on the EREMA Basic technology, used to recycle post-consumer PET into food contact materials.
EREMA basic
Novatex limited
food contact materials
plastic
poly(ethylene terephthalate) (PET)
recycling process
safety assessment
Journal
EFSA journal. European Food Safety Authority
ISSN: 1831-4732
Titre abrégé: EFSA J
Pays: United States
ID NLM: 101642076
Informations de publication
Date de publication:
Jan 2024
Jan 2024
Historique:
medline:
12
1
2024
pubmed:
12
1
2024
entrez:
12
1
2024
Statut:
epublish
Résumé
The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process Novatex (EU register number RECYC313), which uses the EREMA Basic technology. The input material is ■■■■■ washed and dried poly(ethylene terephthalate) (PET) flakes originating from collected post-consumer PET containers, including no more than 5% PET from non-food consumer applications. The flakes are heated in a continuous reactor under vacuum before being extruded. Having examined the challenge test provided, the Panel concluded that the continuous decontamination (step 2), for which a challenge test was provided, is critical in determining the decontamination efficiency of the process. The operating parameters to control the performance of this step are temperature, pressure and residence time. It was demonstrated that this recycling process is able to ensure a level of migration of potential unknown contaminants into food below the conservatively modelled migration of 0.1 μg/kg food derived from the exposure scenario for infants when such recycled PET is used at up to 95% in mixtures with virgin PET, and of 0.15 μg/kg food, derived from the exposure scenario for toddlers when used at up to 100%. Therefore, the Panel concluded that the recycled PET obtained from this process is not of safety concern when used at up to 95% in mixtures with virgin PET for manufacturing of materials and articles for contact with all types of foodstuffs, including drinking water bottles, and at up to 100% for the manufacture of materials and articles for contact with all types of foodstuffs except drinking water, for long-term storage at room temperature or below, with or without hotfill. Articles made of this recycled PET are not intended to be used in microwave or conventional ovens and such uses are not covered by this evaluation.
Identifiants
pubmed: 38213418
doi: 10.2903/j.efsa.2024.8519
pii: EFS28519
pmc: PMC10782240
doi:
Types de publication
Journal Article
Langues
eng
Pagination
e8519Informations de copyright
© 2024 European Food Safety Authority. EFSA Journal published by Wiley‐VCH GmbH on behalf of European Food Safety Authority.
Déclaration de conflit d'intérêts
If you wish to access the declaration of interests of any expert contributing to an EFSA scientific assessment, please contact interestmanagement@efsa.europa.eu.