Flexural strength of 3D-printed nanocomposite provisional resins: Impact of SiO
3D printing
nanocomposite resin
nanoparticle
provisional restoration
Journal
Journal of prosthodontics : official journal of the American College of Prosthodontists
ISSN: 1532-849X
Titre abrégé: J Prosthodont
Pays: United States
ID NLM: 9301275
Informations de publication
Date de publication:
15 Feb 2024
15 Feb 2024
Historique:
received:
27
10
2023
accepted:
13
01
2024
medline:
15
2
2024
pubmed:
15
2
2024
entrez:
15
2
2024
Statut:
aheadofprint
Résumé
The aim of this study was to investigate and compare the influence of zirconium dioxide nanoparticles (ZrO Three dimensional-printed resin (NextDent C&B MFH) was used to fabricate 300 bar-shaped specimens (25 × 2 × 2 mm Compared to the original material, the addition of ZrO The addition of SiO
Types de publication
Journal Article
Langues
eng
Informations de copyright
© 2024 by the American College of Prosthodontists.
Références
AhmadAbadi MN, Goharifar A, Mahabadi M. The effect of fabrication methods (conventional, computer-aided design/computer-aided manufacturing milling, three-dimensional printing) and material type on the fracture strength of provisional restorations. Dent Res J (Isfahan) 2023;20:86.
Karasan D, Legaz J, Boitelle P, Mojon P, Fehmer V, Sailer I. Accuracy of additively manufactured and milled interim 3-unit fixed dental prostheses. J Prosthodont 2022;31(S1):58-69.
Atria PJ, Bordin D, Marti F, Nayak VV, Conejo J, Benalcázar Jalkh E, et al. 3D-printed resins for provisional dental restorations: comparison of mechanical and biological properties. J Esthet Restor Dent 2022;34:804-815.
Pituru SM, Greabu M, Totan A, Greabu M, Totan A, Imre M, et al. A review on the biocompatibility of PMMA-based dental materials for interim prosthetic restorations with a glimpse into their modern manufacturing techniques. Materials 2020;13:2894.
Pagac M, Hajnys J, Ma Q-P, Jancar L, Jansa J, Stefek P, et al. A review of vatphotopolymerization technology: materials, applications, challenges, and future trends of 3D printing. Polymers (Basel) 2021;13(4):598.
Pantea M, Ciocoiu RC, Greabu M, Ripszky Totan A, Imre M, Țâncu AMC, et al. Compressive and flexural strength of 3D-printed and conventional resins designated for interim fixed dental prostheses: an in vitro comparison. Materials 2022;15:3075.
Jain S, Sayed ME, Shetty M, Alqahtani SM, Al Wadei MHD, Gupta SG, et al. Physical and mechanical properties of 3D-printed provisional crowns and fixed dental prosthesis resins compared to CAD/CAM milled and conventional provisional resins: a systematic review and meta-analysis. Polymers (Basel) 2022;14(13):2691.
Aati S, Akram Z, Ngo H, Fawzy AS. Development of 3D printed resin reinforced with modified ZrO2 nanoparticles for long-term provisional dental restorations. Dent Mater 2021;37:360-374.
Gad MM, Fouda SM. Factors affecting flexural strength of 3D-printed resins: a systematic review. J Prosthodont 2023;32(S1):96-110.
Reeponmaha T, Angwaravong O, Angwarawong T. Comparison of fracture strength after thermo-mechanical aging between provisional crowns made with CAD/CAM and conventional method. J Adv Prosthodont 2020;12:218-224.
Al-Dulaijan YA, Alsulaimi L, Alotaibi R, Alboainain A, Akhtar S, Khan SQ, et al. Effect of printing orientation and postcuring time on the flexural strength of 3D-printed resins. J Prosthodont 2023;32:45-52.
Reymus M, Lümkemann N, Stawarczyk B. 3D-printed material for temporary restorations: impact of print layer thickness and post-curing method on degree of conversion. Int J Comput Dent 2019;22:231-237.
Priyadarsini S, Mukherjee S, Mishra M. Nanoparticles used in dentistry: a review. J Oral Biol Craniofac Res 2018;8:58-67.
Al-Thobity AM, Gad MM. Effect of silicon dioxide Nanoparticles on the flexural strength of heat-polymerized acrylic denture base materials: A systematic review and Meta-Analysis. Saudi Dent j 2021;33(8):775-783.
Alshaikh AA, Khattar A, Almindil IA, Alsaif MH, Akhtar S, Khan SQ, et al. 3D-printed nanocomposite denture-base resins: effect of ZrO2 nanoparticles on the mechanical and surface properties in vitro. Nanomaterials (Basel) 2022;18:2451.
Gad MM, Al-Thobity AM, Rahoma A, Abualsaud R, Al-Harbi FA, Akhtar S. Reinforcement of PMMA denture base material with a mixture of ZrO2 nanoparticles and glass fibers. Int J Dent 2019;28:2489393
American National Standard/American Dental Association Standard. Polymer-based restorative materials. Washington, DC, USA: American National Standard; 2016. 27.
Gad MM, Al-Harbi FA, Akhtar S, Fouda SM. 3D-printable denture base resin containing SiO2 nanoparticles: an in vitro analysis of mechanical and surface properties. J Prosthodont 2022;31:784-790.
Derban P, Negrea R, Rominu M, Marsavina L. Influence of the printing angle and load direction on flexure strength in 3D printed materials for provisional dental restorations. Materials (Basel) 2021;14:3376.
Ibrahim A, Shehawy DE, El-Naggar G. Fracture resistance of interim restoration constructed by 3D printing versus CAD/CAM technique (in vitro study). Ain Shams Dent J 2022;19:13-20
Gad MM, Fouda SM. Factors affecting flexural strength of 3D-printed resins: a systematic review. J Prosthodont 2023;32:96-110.
Alshahrani F. Effect of treated zirconium oxide (ZrO2) nanoparticles on the color and surface properties of interim fixed prostheses. J Int Soc Prev Community Dent 2022;12:404-410.
Alshamrani A, Alhotan A, Kelly E, Ellakwa A. Mechanical and biocompatibility properties of 3D-printed dental resin reinforced with glass silica and zirconia nanoparticles. In Vitro Study. Polymers (Basel) 2023;15:2523.
Topouzi M, Kontonasaki E, Bikiaris D, Papadopoulou L, Paraskevopoulos KM, et al. Reinforcement of a PMMA resin for interim fixed prostheses with silica nanoparticles. J Mech Behav Biomed Mater 2017;69:213-222.
Hashem R, Mohamed H. Effect of nano silica incorporation on colour and mechanical properties of two provisional materials. Egy Dent J 2023;69:477-486.
Mustafa BS, Jamal GM, Gh Abdullah O. Improving the tensile, toughness, and flexural properties of epoxy resin based nanocomposites filled with ZrO2 and Y2O3 nanoparticles. Results Phys 2022 Jul 1;38:105662
Katsikis N, Zahradnik F, Helmschrott A, Münstedt H, Vital A. Thermal stability of poly(methyl methacrylate)/silica nano- and microcomposites as investigated by dynamic-mechanical experiments. Polym Degrad Stab 2007;92:1966-1976.
Figuerôa RMS, Conterno B, Arrais CAG, Sugio CYC, Urban VM, Neppelenbroek KH. Porosity, water sorption and solubility of denture base acrylic resins polymerized conventionally or in microwave. J Appl Oral Sci 2018;26:e20170383.
Berli C, Thieringer FM, Sharma N, Müller JA, Dedem P, Fischer J, et al. Comparing the mechanical properties of pressed, milled, and 3D-printed resins for occlusal devices. J Prosthet Dent 2020;124:780-786.