Effects of aging on attachment of Candida albicans to conventional heat-polymerized, CAD-CAM milled, and CAD-CAM 3D-printed acrylic resin bases.
additive manufacturing
denture stomatitis
polymethylmethacrylate
subtractive manufacturing
Journal
Journal of prosthodontics : official journal of the American College of Prosthodontists
ISSN: 1532-849X
Titre abrégé: J Prosthodont
Pays: United States
ID NLM: 9301275
Informations de publication
Date de publication:
19 Mar 2024
19 Mar 2024
Historique:
received:
02
08
2023
accepted:
03
03
2024
medline:
19
3
2024
pubmed:
19
3
2024
entrez:
19
3
2024
Statut:
aheadofprint
Résumé
The aim of this study was to assess Candida albicans attachment on conventionally fabricated (polymethylmethacrylate, PMMA), CAD-CAM milled, and 3D-printed acrylic resin bases pre- and post-simulated thermal aging, along with examining material surface changes after aging. Forty-six samples (10 mm × 10 mm × 2 mm) for each of four material groups (conventional heat-polymerized PMMA, CAD-CAM milled acrylic resin base, CAD-CAM 3D-printed methacrylate resin base, CAD-CAM 3D-printed urethane methacrylate resin base) were subjected to 0, 1, or 2 years of simulated thermal aging. Microscopic images were taken before and after aging, and C. albicans attachment was quantified using cell proliferation assay (XTT). Statistical analysis employed analysis of variance (α = 0.05). Two-way factorial analysis showed no significant differences based on acrylic resin type or thermal aging (p = 0.344 and p = 0.091 respectively). However, C. albicans attachment significantly differed between 0- and 2-year thermally aged groups (p = 0.004), mainly due to elevated initial attachments on CAD-CAM milled acrylic resin base and CAD-CAM 3D-printed urethane methacrylate resin base. Regardless of the fabrication technique and material combination, no significant differences were found in C. albicans adhesion pre- or post- thermal aging. Milled and 3D-printed bases compared favorably with heat- polymerized PMMA in their affinity for C. albicans attachment and surface characteristics after aging. These findings indicate that the risk of patients developing denture stomatitis might not be linked to the type of acrylic resin or fabrication method used.
Types de publication
Journal Article
Langues
eng
Subventions
Organisme : Graduate Medical Education
ID : WRNMMC-EDO-2019-0419
Informations de copyright
© 2024 by the American College of Prosthodontists.
Références
United Nations DoEaSA, Population Division (2019). World Population Ageing 2019: Highlights (ST/ESA/SER.A/430).
Fleming E, Afful J, Griffin SO. Prevalence of Tooth Loss Among Older Adults: United States, 2015-2018. NCHS Data Brief 2020, 1-8
American College of Prosthodontists. Facts and Figures. Accessed Feb 23, 2024. https://www.gotoapro.org/facts-figures/
Gendreau L, Loewy ZG. Epidemiology and etiology of denture stomatitis. J Prosthodont 2011;20:251-260
Emami E, De Grandmont P, Rompré PH, Barbeau J, Pan S, Feine JS. Favoring trauma as an etiological factor in denture stomatitis. J Dent Res 2008;87:440-444
Kovač-Kavčič M, Skalerič U. The prevalence of oral mucosal lesions in a population in Ljubljana, Slovenia. J Oral Pathol Med 2000;29:331-335
Shulman JD, Rivera-Hidalgo F, Beach MM. Risk factors associated with denture stomatitis in the United States. J Oral Pathol Med 2005;34:340-346
Coco BJ, Bagg J, Cross LJ, Jose A, Cross J, Ramage G. Mixed Candida albicans and Candida glabrata populations associated with the pathogenesis of denture stomatitis. Oral Microbiol Immunol 2008;23:377-383
Yigit N, Aktas E, Dagistan S, Ayyildiz A. Investigating biofilm production, coagulase and hemolytic activity in Candida species isolated from denture stomatitis patients. Eurasian J Med 2011;43:27-32
Kumamoto CA, Vinces MD. Alternative Candida albicans lifestyles: growth on surfaces. Annu Rev Microbiol 2005;59:113-133
Ramage G, Tomsett K, Wickes BL, López-Ribot JL, Redding SW. Denture stomatitis: a role for Candida biofilms. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2004;98:53-59
Ramage G, Martínez JP, López-Ribot JL. Candida biofilms on implanted biomaterials: a clinically significant problem. FEMS Yeast Res 2006;6:979-986
Bidra AS, Taylor TD, Agar JR. Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives. J Prosthet Dent 2013;109:361-366
Khindria S, Mittal S, Sukhija U. Evolution of denture base materials. J Indian Prosthodont Soc 2009;9:64
Ladha K, Verma M. 19th century denture base materials revisited. J Hist Dent 2011;59:1-11.
Rueggeberg FA. From vulcanite to vinyl, a history of resins in restorative dentistry. J Prosthet Dent 2002;87:364-379
Singh S, Palaskar JN, Mittal S. Comparative evaluation of surface porosities in conventional heat polymerized acrylic resin cured by water bath and microwave energy with microwavable acrylic resin cured by microwave energy. Contemp Clin Dent 2013;4:147-151
Anusavice KJ, Shen C, Rawls HR. Phillips' science of dental materials (ed 12), Elsevier Health Sciences, 2012.
Infante L, Yilmaz B, Mcglumphy E, Finger I. Fabricating complete dentures with CAD/CAM technology. J Prosthet Dent 2014;111:351-355
Kattadiyil M, Goodacre C, Baba N. CAD/CAM complete dentures: a review of two commercial fabrication systems. J Calif Dent Assoc 2013;41:407-416
Al-Fouzan AF, Al-Mejrad LA, Albarrag AM. Adherence of Candida to complete denture surfaces in vitro: a comparison of conventional and CAD/CAM complete dentures. J Adv Prosthodont 2017;9:402-408
Dandekeri SS, Sowmya MK, Bhandary S. Stereolithographic surgical template: a review. J Clin Diagn Res 2013;7:2093-2095
Lal K, White GS, Morea DN, Wright RF. Use of stereolithographic templates for surgical and prosthodontic implant planning and placement. Part I. The concept. J Prosthodont 2006;15:51-58
Rosenfeld AL, Mandelaris GA, Tardieu PB. Prosthetically directed implant placement using computer software to ensure precise placement and predictable prosthetic outcomes. Part 2: rapid-prototype medical modeling and stereolithographic drilling guides requiring bone exposure. Int J Periodontics Restorative Dent 2006;26:347-353
Sun J, Zhang F-Q. The application of rapid prototyping in prosthodontics. J Prosthodont 2012;21:641-644
Torabi K, Farjood E, Hamedani S. Rapid prototyping technologies and their applications in prosthodontics, a review of literature. J Dent 2015;16:1
Totu EE, Nechifor AC, Nechifor G, Aboul-Enein HY, Cristache CM. Poly(methyl methacrylate) with TiO2 nanoparticles inclusion for stereolithographic complete denture manufacturing-the future in dental care for elderly edentulous patients? J Dent 2017;59:68-77
Kalberer N, Mehl A, Schimmel M, Müller F, Srinivasan M. CAD-CAM milled versus rapidly prototyped (3D-printed) complete dentures: an in vitro evaluation of trueness. J Prosthet Dent 2019;121:637-643
Manoj A, Bhuyan M, Banik SR, Ravi Sankar M. 3D Printing of Nasopharyngeal Swabs for COVID-19 diagnose: past and current trends. Mater Today: Proc 2021;44:1361-1368
Tosto C, Pergolizzi E, Blanco I, Patti A, Holt P, Karmel S, et al. Epoxy based blends for additive manufacturing by liquid crystal display (LCD) printing: the effect of blending and dual curing on daylight curable resins. Polymers 2020;12:1594
Redmann A, Oehlmann P, Scheffler T, Kagermeier L, Osswald TA. Thermal curing kinetics optimization of epoxy resin in Digital Light Synthesis. Addit Manuf 2020;32:101018
Tumbleston JR, Shirvanyants D, Ermoshkin N, Janusziewicz R, Johnson AR, Kelly D, et al. Continuous liquid interface production of 3D objects. Science 2015;347:1349-1352
Baba NZ, Goodacre BJ, Goodacre CJ, Müller F, Wagner S. CAD/CAM completedenturesystems and pPhysical properties: a review of the literature. J Prosthodont 2020;30(S2):113-124. doi: 10.1111/jopr.13243
Chung Y-J, Park J-M, Kim T-H, Ahn J-S, Cha H-S, Lee J-H. 3D printing of resin material for denture artificial teeth: chipping and indirect tensile fracture resistance. Materials 2018;11:1798
Carbon. Additive manufacturing of dental devices: a primer on regulatory affairs. Accessed Feb 23, 2024. https://carbon3d.com/resources/whitepaper/additive-manufacturing-a-primer-on-regulatory-affairs">carbon3d.com/resources/whitepaper/additive-manufacturing-a-primer-on-regulatory-affairs
Rahma Alammari M. The influence of polishing techniques on pre-polymerized CAD∖CAM acrylic resin denture bases. Electron Physician 2017;9:5452
Sipahi C, Anil N, Bayramli E. The effect of acquired salivary pellicle on the surface free energy and wettability of different denture base materials. J Dent 2001;29:197-204
Gesser HD, Castaldi CR. The preparation and evaluation of wetting dentures for adhesion and retention. J Prosthet Dent 1971;25:236-243
Monsénégo P, Proust J. Complete denture retention. Part I: physical analysis of the mechanism. Hysteresis of the solid-liquid contact angle. J Prosthet Dent 1989;62:189-196
Steinmassl O, Dumfahrt H, Grunert I, Steinmassl P-A. Influence of CAD/CAM fabrication on denture surface properties. J Oral Rehabil 2018;45:406-413
Srinivasan M, Gjengedal H, Cattani-Lorente M, Moussa M, Durual S, Schimmel M, et al. CAD/CAM milled complete removable dental prostheses: an in vitro evaluation of biocompatibility, mechanical properties, and surface roughness. Dent Mater J 2018:2017-2207
Arslan M, Murat S, Alp G, Zaimoglu A. Evaluation of flexural strength and surface properties of prepolymerized CAD/CAM PMMA-based polymers used for digital 3D complete dentures. Int J Comput Dent 2018;21:31-40
Murat S, Alp G, Alatalı C, Uzun M. In vitro evaluation of adhesion of Candida albicans on CAD/CAM PMMA-based polymers. J Prosthodont 2019;28:e873-e879
Alp G, Johnston WM, Yilmaz B. Optical properties and surface roughness of prepolymerized poly (methyl methacrylate) denture base materials. J Prosthet Dent 2019;121:347-352
Shim JS, Kim J-E, Jeong SH, Choi YJ, Ryu JJ. Printing accuracy, mechanical properties, surface characteristics, and microbial adhesion of 3D-printed resins with various printing orientations. J Prosthet Dent 2020;124:468-475
Katsikogianni M, Missirlis Y. Concise review of mechanisms of bacterial adhesion to biomaterials and of techniques used in estimating bacteria-material interactions. Eur Cell Mater 2004;8:37-57
Tuminelli FJ, Cooper LF, Campbell SD, Felton DA, Vickers VA, Masri R, et al. Position Statement: Frequency of Denture Replacement. American College of Prosthodontists 2015. Accessed May 2, 2021. https://www.prosthodontics.org/about-acp/position-statement-thefrequency-of-denture-replacement/
Lewis DW, Thompson GW, Folkins A. Denture replacement during a 14-year period in Alberta's universal dental plan for the elderly. J Prosthet Dent 1995;74:264-269
Delta Dental. Clear Plan Insurance Policy. Accessed Feb 23, 2024. https://www.deltadental.com/us/en/shop-for-insurance/dental-plans.html
Hoad-Reddick G. Oral pathology and prostheses-are they related? Investigations in an elderly population. J Oral Rehabil 1989;16:75-87
Lira AF, Consani RLX, Mesquita MF, Nóbilo MAA, Henriques GEP. Effect of toothbrushing, chemical disinfection and thermocycling procedures on the surface microroughness of denture base acrylic resins. Gerodontology 2012;29:e891-e897
Dentsply Sirona. Lucitone 199 Denture Base Resin Directions for Use, Dentsply Sirona, Document #588001 Rev. 12 (05/17): Accessed Feb 23, 2024. https://www.dentsplysirona.com/content/dentsply-sirona-dt/us/en/customer-support/download-center/download-details.html?assetPath=/content/dam/master/product-procedure-brand-categories/lab/product-categories/denture-base/lucitone-199-denture-base/ifu/LAB-IFU-Lucitone-199-multilingual-588001-2021-05.pdf
Aeran H, Sharma S, Kumar V, Gupta N. Use of clinical UV chamber to disinfect dental impressions: a comparative study. J Clin Diagn Res 2015;9:ZC67-ZC70
Ribeiro Pinto JR, Mesquita MF, De Arruda Nóbilo MA, Elias Pessanha Henriques G. Evaluation of varying amounts of thermal cycling on bond strength and permanent deformation of two resilient denture liners. J Prosthet Dent 2004;92:288-293
Ramage G, Vandewalle K, Wickes BL, López-Ribot JL. Characteristics of biofilm formation by Candida albicans. Rev Iberoam Micol 2001;18:163-170
Kim TH, Huh JB, Lee J, Bae E-B, Park CJ. Retrospective comparison of postinsertion maintenances between conventional and 3D printed complete dentures fabricatedin a predoctoral Clinic. J Prosthodont 2021;30(S2):158-162 https://doi.org/10.1111/jopr.13322
Meirowitz A, Rahmanov A, Shlomo E, Zelikman H, Dolev E, Sterer N. Effect of denture base fabrication technique on Candida albicans adhesion in vitro. Materials 2021;14:221
Felton DA. Evidence-based guidelines for the care and maintenance of complete dentures: a publication of the American College of Prosthodontists. J Prosthodont 2011;20:S1-S12