Effects of Coloring Liquid Dipping Time and Surface Finishing Procedures on the Optical Properties of Monolithic Zirconia.
Journal
Nigerian journal of clinical practice
ISSN: 1119-3077
Titre abrégé: Niger J Clin Pract
Pays: India
ID NLM: 101150032
Informations de publication
Date de publication:
01 Apr 2024
01 Apr 2024
Historique:
received:
13
11
2023
accepted:
08
02
2024
medline:
29
4
2024
pubmed:
29
4
2024
entrez:
28
4
2024
Statut:
ppublish
Résumé
Monolithic zirconia restorations can be produced from self-colored or uncolored blocks. The coloring procedure of uncolored blocks and surface treatments may affect the appearance of the restoration. The purpose of this study is to evaluate the effect of liquid coloring and surface treatments on optical properties of translucent monolithic zirconia. All specimens were cut from zirconia blocks with a thickness of 1 mm. Specimens were dipped in the coloring liquids for 3 min, 5 min, and 7 min and then divided into groups of 10 specimens for surface treatments. Glaze and mechanical polishing were applied, and the color of the specimens was measured under the D65 lighting condition with a spectrophotometer device. Color values obtained from the CIE Lab formula and the translucency parameter (TP), opalescence parameter (OP), and contrast ratio (CR) were calculated. The normality of the data was confirmed with the Shapiro-Wilk test. A three-way analysis of variance (ANOVA) was used to assess the effect of dipping time, liquid shade, and surface treatments. The effect of liquid shade and dipping time on the TP, OP, and CR parameters were statistically significant, and the TP values were reduced with the application of coloring liquid. Mechanical polishing groups had higher OP values and lower TP values than glazed groups. In cases where high translucency is required, it may be advisable to use self-colored blocks and apply glaze as a surface treatment to achieve the desired optical properties.
Sections du résumé
BACKGROUND
BACKGROUND
Monolithic zirconia restorations can be produced from self-colored or uncolored blocks. The coloring procedure of uncolored blocks and surface treatments may affect the appearance of the restoration.
AIM
OBJECTIVE
The purpose of this study is to evaluate the effect of liquid coloring and surface treatments on optical properties of translucent monolithic zirconia.
METHODS
METHODS
All specimens were cut from zirconia blocks with a thickness of 1 mm. Specimens were dipped in the coloring liquids for 3 min, 5 min, and 7 min and then divided into groups of 10 specimens for surface treatments. Glaze and mechanical polishing were applied, and the color of the specimens was measured under the D65 lighting condition with a spectrophotometer device. Color values obtained from the CIE Lab formula and the translucency parameter (TP), opalescence parameter (OP), and contrast ratio (CR) were calculated. The normality of the data was confirmed with the Shapiro-Wilk test. A three-way analysis of variance (ANOVA) was used to assess the effect of dipping time, liquid shade, and surface treatments.
RESULTS
RESULTS
The effect of liquid shade and dipping time on the TP, OP, and CR parameters were statistically significant, and the TP values were reduced with the application of coloring liquid. Mechanical polishing groups had higher OP values and lower TP values than glazed groups.
CONCLUSION
CONCLUSIONS
In cases where high translucency is required, it may be advisable to use self-colored blocks and apply glaze as a surface treatment to achieve the desired optical properties.
Identifiants
pubmed: 38679773
doi: 10.4103/njcp.njcp_794_23
pii: 01253091-202404000-00013
doi:
Substances chimiques
Zirconium
C6V6S92N3C
zirconium oxide
S38N85C5G0
Dental Materials
0
Coloring Agents
0
Types de publication
Journal Article
Langues
eng
Sous-ensembles de citation
IM
Pagination
496-503Informations de copyright
Copyright © 2024 Copyright: © 2024 Nigerian Journal of Clinical Practice.
Références
Zhang Y, Lawn BR. Evaluating dental zirconia. Dent Mater J 2019;35:15–23.
Güth J-F, Stawarczyk B, Edelhoff D, Liebermann A. Zirconia and its novel compositions:What do clinicians need to know?. Quintessence Int 2019;50:512–20.
Kim H-K, Kim S-H. Optical properties of pre-colored dental monolithic zirconia ceramics. J Dent 2016;55:75–81.
Sen N, Sermet IB, Cinar S. Effect of coloring and sintering on the translucency and biaxial strength of monolithic zirconia. J Prosthet Dent 2018;119:308.e1–7.
Nam J-Y, Park M-G. Effects of aqueous and acid-based coloring liquids on the hardness of zirconia restorations. J Prosthet Dent 2017;117:662–8.
Kaya G. Production and characterization of self-colored dental zirconia blocks. Ceram Int 2013;39:511–7.
Tabatabaian F, Karimi M, Namdari M. Color match of high translucency monolithic zirconia restorations with different thicknesses and backgrounds. J Esthet Dent 2020;32:615–21.
Ekren O. The effect of coloring liquid dipping time on the fracture load and color of zirconia ceramics. J Adv Prosthodont 2017;9:67–73.
Shahmiri R, Standard OC, Hart JN, Sorrell CC. Optical properties of zirconia ceramics for esthetic dental restorations:A systematic review. J Prosthet Dent 2018;119:36–46.
Kim H-K, Kim S-H, Lee J-B, Han J-S, Yeo I-S, Ha S-R. Effect of the amount of thickness reduction on color and translucency of dental monolithic zirconia ceramics. J Adv Prosthodont 2016;8:37–42.
Alghazzawi TF. The effect of extended aging on the optical properties of different zirconia materials. J Prosthodont Res 2017;61:305–14.
Kim H-K, Kim S-H, Lee J-B, Ha S-R. Effects of surface treatments on the translucency, opalescence, and surface texture of dental monolithic zirconia ceramics. J Prosthet Dent 2016;115:773–9.
Manziuc MM, Gasparik C, Burde AV, Colosi HA, Negucioiu M, Dudea D. Effect of glazing on translucency, color, and surface roughness of monolithic zirconia materials. J Esthet Restor Dent 2019;31:478–85.
Huh YH, Yang EC, Park CJ, Cho LR. In vitro evaluation of the polishing effect and optical properties of monolithic zirconia. J Prosthet Dent 2018;119:994–9.
Tabatabaian F. Color aspect of monolithic zirconia restorations:A review of the literature. J Prosthodont 2018;28:276–87.
Lee W-F, Feng S-W, Lu Y-J, Wu H-J, Peng P-W. Effects of two surface finishes on the color of cemented and colored anatomic-contour zirconia crowns. J Prosthet Dent 2016;116:264–8.
Sarac D, Sarac YS, Yuzbasioglu E, Bal S. The effects of porcelain polishing systems on the color and surface texture of feldspathic porcelain. J Prosthet Dent 2006;96:122–8.
Kim H-K, Kim S-H, Lee J-B, Han J-S, Yeo I-S. Effect of polishing and glazing on the color and spectral distribution of monolithic zirconia. J Adv Prosthodont 2013;5:296–304.
Kim I-J, Lee Y-K, Lim B-S, Kim C-W. Effect of surface topography on the color of dental porcelain. J Mater Sci Mater Med 2003;14:405–9.
Vichi A, Sedda M, Fabian Fonzar R, Carrabba M, Ferrari M. Comparison of contrast ratio, translucency parameter, and flexural strength of traditional and “augmented translucency”zirconia for CEREC CAD/CAM system. J Esthet Restor Dent 2016;28:32–9.
Kim H-K, Kim S-H. Effect of the number of coloring liquid applications on the optical properties of monolithic zirconia. Dent Mater 2014;30:229–37.
Tuncel I, Eroglu E, Sari T, Usumez A. The effect of coloring liquids on the translucency of zirconia framework. J Adv Prosthodont 2013;5:448–51.
Jiang L, Wang CY, Zheng SN, Xue J, Zhou JL, Li W. Effect of Fe₂O₃on optical properties of zirconia dental ceramic. Chin J Dent Res 2015;18:35–40.
Rafael CF, Cesar PF, Fredel M, de Souza Magini R, Liebermann A, Volpato CAM. Impact of laboratory treatment with coloring and fluorescent liquids on the optical properties of zirconia before and after accelerated aging. J Prosthet Dent 2018;120:276–81.
Shah K, Holloway J, Denry I. Effect of coloring with various metal oxides on the microstructure, color, and flexural strength of 3Y-TZP. J Biomed Mater Res B Appl Biomater 2008;87:329–37.
Spyropoulou P-E, Giroux EC, Razzoog ME, Duff RE. Translucency of shaded zirconia core material. J Prosthet Dent 2011;105:304–7.
Giti R, Hojati SA. Effect of varying thickness and number of coloring liquid applications on the color of anatomic contour monolithic zirconia ceramics. J Dent 2018;19:311–9.
Sulaiman TA, Abdulmajeed AA, Donovan TE, Vallittu PK, Närhi TO, Lassila LV. The effect of staining and vacuum sintering on optical and mechanical properties of partially and fully stabilized monolithic zirconia. Dent Mater J 2015;34:605–10.
Sabet H, Wahsh M, Sherif A, Salah T. Effect of different immersion times and sintering temperatures on translucency of monolithic nanocrystalline zirconia. Futur Dent J 2018;4:84–9.
Celik S, Ucar Y, Ekren O. Effect of coloring liquids on color of zirconia frameworks and bond strength of zirconia/veneering ceramic. J Prosthet Dent 2020;124:110–5.
Ahangari AH, Ardakani KT, Mahdavi F, Ardakani MT. The effect of two shading techniques on value of zirconia-based crowns. J Dent 2015;16:129–33.
Auzani ML, Dapieve KS, Zucuni CP, Pereira GKR, Valandro LF. Influence of shading technique on mechanical fatigue performance and optical properties of a 4Y-TZP ceramic for monolithic restorations. J Mech Behav Biomed Mater 2020;102:103457.
Papageorgiou-Kyrana A, Kokoti M, Kontonasaki E, Koidis P. Evaluation of color stability of preshaded and liquid-shaded monolithic zirconia. J Prosthet Dent 2018;119:467–72.
Herpel C, Rammelsberg P, Rues S, Zenthöfer A, Seceleanu I, Corcodel N. Color stability of individually stained monolithic zirconia following occlusal adjustment. J Esthet Restor Dent 2021;33:387–93.
Corcodel N, Herpel C, Rammelsberg P, Rion K, Seceleanu I. Effect of grinding on the optical properties of monolithic zirconia. J Esthet Restor Dent 2022;34:942–50.
İnal CB, Güngör MB, Nemli SK. Effects of dipping time in coloring liquids and surface finishing technique on the color of monolithic zirconia. Acta Odontol Turc 2023;40:48–54.
Yılmaz SavaşT, Akın C. Effects of sintering protocol and dipping time on the optical properties of monolithic zirconia. J Prosthet Dent 2022;1275:801.e1–8.
Lee YK, Yu B. Measurement of opalescence of tooth enamel. J Dent 2007;35:690–4.
Lawson NC, Jurado CA, Huang CT, Morris GP, Burgess JO, Liu PR, et al. Effect of surface treatment and cement on fracture load of traditional zirconia (3Y), translucent zirconia (5Y), and lithium disilicate crowns. J Prosthodont 2019;28:659–65.
Liu MC, Aquilino SA, Lund PS, Vargas MA, Diaz-Arnold AM, et al. Human perception of dental porcelain translucency correlated to spectrophotometric measurements. J Prosthodont 2010;19:187–93.
Farzin M, Ansarifard E, Taghva M, Imanpour R. Effect of external staining on the optical properties and surface roughness of monolithic zirconia of different thicknesses. J Prosthet Dent 2021;126:687.e1–8.