Modification of polymethylmethacrylate bone cement with halloysite clay nanotubes.
Bone cement
Clay
Compressive strength
Flexural strength
Halloysite
Nanotubes
PMMA
Polymethylmethacrylate
Journal
BMC oral health
ISSN: 1472-6831
Titre abrégé: BMC Oral Health
Pays: England
ID NLM: 101088684
Informations de publication
Date de publication:
04 Aug 2024
04 Aug 2024
Historique:
received:
24
04
2024
accepted:
12
07
2024
medline:
5
8
2024
pubmed:
5
8
2024
entrez:
4
8
2024
Statut:
epublish
Résumé
Polymethylmethacrylate (PMMA) bone cement is used in orthopedics and dentistry to get primary fixation to bone but doesn't provide a mechanically and biologically stable bone interface. Therefore, there was a great demand to improve the properties of the PMMA bone cement to reduce its clinical usage limitations and enhance its success rate. Recent studies demonstrated that the addition of halloysite nanotubes (HNTs) to a polymeric-based material can improve its mechanical and thermal characteristics. The purpose of the study is to assess the compressive strength, flexural strength, maximum temperature, and setting time of traditional PMMA bone cements that have been manually blended with 7 wt% HNT fillers. PMMA powder and monomer liquid were combined to create the control group, the reinforced group was made by mixing the PMMA powder with 7 wt% HNT fillers before liquid mixing. Chemical characterization of the HNT fillers was employed by X-ray fluorescence (XRF). The morphological examination of the cements was done using a scanning electron microscope (SEM). Analytical measurements were made for the compressive strength, flexural strength, maximum temperature, and setting time. Utilizing independent sample t-tests, the data was statistically assessed to compare mean values (p < 0.05). The findings demonstrated that the novel reinforced PMMA-based bone cement with 7 wt% HNT fillers showed higher mean compressive strength values (93 MPa) and higher flexural strength (72 MPa). and lower maximum temperature values (34.8 °C) than the conventional PMMA bone cement control group, which was (76 MPa), (51 MPa), and (40 °C), respectively (P < 0.05). While there was no significant difference in the setting time between the control and the modified groups. The novel PMMA-based bone cement with the addition of 7 wt% HNTs can effectively be used in orthopedic and dental applications, as they have the potential to enhance the compressive and flexural strength and reduce the maximum temperatures.
Sections du résumé
BACKGROUND
BACKGROUND
Polymethylmethacrylate (PMMA) bone cement is used in orthopedics and dentistry to get primary fixation to bone but doesn't provide a mechanically and biologically stable bone interface. Therefore, there was a great demand to improve the properties of the PMMA bone cement to reduce its clinical usage limitations and enhance its success rate. Recent studies demonstrated that the addition of halloysite nanotubes (HNTs) to a polymeric-based material can improve its mechanical and thermal characteristics.
OBJECTIVES
OBJECTIVE
The purpose of the study is to assess the compressive strength, flexural strength, maximum temperature, and setting time of traditional PMMA bone cements that have been manually blended with 7 wt% HNT fillers.
METHODS
METHODS
PMMA powder and monomer liquid were combined to create the control group, the reinforced group was made by mixing the PMMA powder with 7 wt% HNT fillers before liquid mixing. Chemical characterization of the HNT fillers was employed by X-ray fluorescence (XRF). The morphological examination of the cements was done using a scanning electron microscope (SEM). Analytical measurements were made for the compressive strength, flexural strength, maximum temperature, and setting time. Utilizing independent sample t-tests, the data was statistically assessed to compare mean values (p < 0.05).
RESULTS
RESULTS
The findings demonstrated that the novel reinforced PMMA-based bone cement with 7 wt% HNT fillers showed higher mean compressive strength values (93 MPa) and higher flexural strength (72 MPa). and lower maximum temperature values (34.8 °C) than the conventional PMMA bone cement control group, which was (76 MPa), (51 MPa), and (40 °C), respectively (P < 0.05). While there was no significant difference in the setting time between the control and the modified groups.
CONCLUSION
CONCLUSIONS
The novel PMMA-based bone cement with the addition of 7 wt% HNTs can effectively be used in orthopedic and dental applications, as they have the potential to enhance the compressive and flexural strength and reduce the maximum temperatures.
Identifiants
pubmed: 39098928
doi: 10.1186/s12903-024-04600-3
pii: 10.1186/s12903-024-04600-3
doi:
Substances chimiques
Polymethyl Methacrylate
9011-14-7
Clay
T1FAD4SS2M
Bone Cements
0
Aluminum Silicates
0
Types de publication
Journal Article
Langues
eng
Sous-ensembles de citation
IM
Pagination
893Informations de copyright
© 2024. The Author(s).
Références
Rokaya D, Srimaneepong V, Sapkota J, Qin J, Siraleartmukul K, Siriwongrungson V. Polymeric materials and films in dentistry: an overview. J Adv Res. 2018;14:25–34.
doi: 10.1016/j.jare.2018.05.001
pubmed: 30364755
pmcid: 6198729
Abdelraouf RM, Bayoumi RE, Hamdy TM. Effect of powder/water ratio variation on viscosity, tear strength and detail reproduction of dental alginate impression material (in vitro and clinical study). Polym (Basel). 2021;13:1–11.
Tamer M, Hamdy, Saniour SH, Sherief MA, Zaki DY. Effect of incorporation of 20 wt% amorphous Nano-Hydroxyapatite Fillers in Poly methyl methacrylate composite on the compressive strength. RJPBCS. 2015;6:975–8585.
Hamdy TM, Mousa SMA, Sherief MA. Effect of incorporation of lanthanum and cerium-doped hydroxyapatite on acrylic bone cement produced from phosphogypsum waste. Egypt J Chem. 2020;63:1823–32.
Karpiński. Szabelski, Maksymiuk. Seasoning Polymethyl Methacrylate (PMMA) bone cements with incorrect Mix ratio. Mater (Basel). 2019;12:3073.
doi: 10.3390/ma12193073
Hamdy TM. Polymerization shrinkage in contemporary resin-based dental composites: a review article. Egypt J Chem. 2021;64:3087–92.
Weingärtner K, Störmann P, Schramm D, Wutzler S, Zacharowski K, Marzi I, et al. Bone cement implantation syndrome in cemented hip hemiarthroplasty—a persistent risk. Eur J Trauma Emerg Surg. 2022;48:721–9.
doi: 10.1007/s00068-020-01587-8
pubmed: 33495852
Cheng C-H, Chuang H-Y, Lin H-L, Liu C-L, Yao C-H. Surgical results of cranioplasty using three-dimensional printing technology. Clin Neurol Neurosurg. 2018;168:118–23.
doi: 10.1016/j.clineuro.2018.03.004
pubmed: 29549811
Vallo CI. Flexural strength distribution of a PMMA-based bone cement. J Biomed Mater Res. 2002;63:226–36.
doi: 10.1002/jbm.10129
pubmed: 11870658
Standard S. ISO 5833:2002 Implants for surgery - Acrylic resin cements. 2002;1 I:2–5.
International A. ASTM F451-21 Standard Specification for Acrylic Bone Cement. 2021;10:1–5.
Świeczko-Żurek B, Zieliński A, Bociąga D, Rosińska K, Gajowiec G. Influence of different nanometals implemented in PMMA bone cement on Biological and Mechanical properties. Nanomaterials. 2022;12.
Kehribar L, Aydın M, Coşkun HS, Surucu S. Silver nanoparticles enhance the Antibacterial Effect of Antibiotic-loaded bone cement. Cureus. 2023;15:1–6.
Miola M, Lucchetta G, Verné E. Physical, mechanical, and Biological properties of PMMA-Based Composite Bone Cement Containing Silver-Doped Bioactive and Antibacterial Glass Particles with different particles sizes. Mater (Basel). 2023;16:4499.
doi: 10.3390/ma16134499
Hamdy TM. Polymers and Ceramics Biomaterials in Orthopedics and Dentistry: a review article. Egypt J Chem. 2018;61:723–30.
Wu F, Zheng J, Li Z, Liu M. Halloysite nanotubes coated 3D printed PLA pattern for guiding human mesenchymal stem cells (hMSCs) orientation. Chem Eng J. 2019;359:672–83.
doi: 10.1016/j.cej.2018.11.145
Santos AC, Ferreira C, Veiga F, Ribeiro AJ, Panchal A, Lvov Y, et al. Halloysite clay nanotubes for life sciences applications: from drug encapsulation to bioscaffold. Adv Colloid Interface Sci. 2018;257:58–70.
doi: 10.1016/j.cis.2018.05.007
pubmed: 29887382
Gaaz T, Sulong A, Kadhum A, Al-Amiery A, Nassir M, Jaaz A. The impact of Halloysite on the Thermo-Mechanical properties of Polymer composites. Molecules. 2017;22:838.
doi: 10.3390/molecules22050838
pubmed: 28531126
pmcid: 6154593
Naumenko EA, Guryanov ID, Yendluri R, Lvov YM, Fakhrullin RF. Clay nanotube–biopolymer composite scaffolds for tissue engineering. Nanoscale. 2016;8:7257–71.
doi: 10.1039/C6NR00641H
pubmed: 26974658
Kamalieva RF, Ishmukhametov IR, Batasheva SN, Rozhina EV, Fakhrullin RF. Uptake of halloysite clay nanotubes by human cells: Colourimetric viability tests and microscopy study. Nano-Structures & Nano-Objects. 2018;15:54–60.
Lutyński M, Sakiewicz P, Lutyńska S. Characterization of Diatomaceous Earth and Halloysite resources of Poland. Minerals. 2019;9:670.
doi: 10.3390/min9110670
Wei Y, Baskaran N, Wang H-Y, Su Y-C, Nabilla SC, Chung R-J. Study of polymethylmethacrylate/tricalcium silicate composite cement for orthopedic application. Biomed J. 2023;46:100540.
doi: 10.1016/j.bj.2022.05.005
pubmed: 35640805
Ruiz Rojas LM, Valencia Zapata ME, Gordillo Suarez M, Advincula R, Grande-Tovar CD. Mina Hernández JH. Optimization of mechanical and setting properties in Acrylic Bone cements added with Graphene Oxide. Appl Sci. 2021;11:5185.
doi: 10.3390/app11115185
Zhao R, Yang R, Cooper PR, Khurshid Z, Shavandi A, Ratnayake J. Bone grafts and substitutes in dentistry: a review of current trends and developments. Molecules. 2021;26.
Zafar MS. Prosthodontic applications of polymethyl methacrylate (PMMA): an update. Polymers. 2020;12:1–35.
doi: 10.3390/polym12102299
Bistolfi F, Vernè A. Miola. PMMA-Based bone cements and the Problem of Joint Arthroplasty infections: Status and New perspectives. Mater (Basel). 2019;12:4002.
doi: 10.3390/ma12234002
Hamdy TM, Saniour SH, Sherief MA, Zaki DY. Effect of incorporation of 20 wt% amorphous nano-hydroxyapatite fillers in poly methyl methacrylate composite on the compressive strength. Res J Pharm Biol Chem Sci. 2015;6:1136–41.
Khellafi H, Bouziane MM, Djebli A, Mankour A, Bendouba M, Bachir Bouiadjra BA, et al. Investigation of mechanical behaviour of the bone cement (PMMA) under combined Shear and Compression Loading. J Biomimetics Biomater Biomed Eng. 2019;41:37–48.
doi: 10.4028/www.scientific.net/JBBBE.41.37
Lewis G, Mladsi S. Correlation between impact strength and fracture toughness of PMMA-based bone cements. Biomaterials. 2000;21:775–81.
doi: 10.1016/S0142-9612(99)00226-4
pubmed: 10721746
Kubota M, Yokoi T, Ogawa T, Saito S, Furuya M, Yokota K, et al. Setting behaviour, mechanical properties and heat generation under alternate current magnetic fields of Fe 3 O 4 /TiO 2 /PMMA composite bone cement. Med Devices Sens. 2020;3:1–5.
doi: 10.1002/mds3.10114
Pahlevanzadeh F, Bakhsheshi-Rad HR, Kharaziha M, Kasiri-Asgarani M, Omidi M, Razzaghi M, et al. CNT and rGO reinforced PMMA based bone cement for fixation of load bearing implants: mechanical property and biological response. J Mech Behav Biomed Mater. 2021;116:104320.
doi: 10.1016/j.jmbbm.2021.104320
pubmed: 33571842
Franciszczak P, Taraghi I, Paszkiewicz S, Meljon A, Piesowicz E, Burzyński M. Effect of halloysite nanotube on mechanical properties, thermal stability and morphology of polypropylene and polypropylene/short kenaf fibers hybrid biocomposites. Mater (Basel). 2020;13:1–13.
Zubkiewicz A, Szymczyk A, Franciszczak P, Kochmanska A, Janowska I, Paszkiewicz S. Comparing Multi-walled Carbon nanotubes and Halloysite nanotubes as Reinforcements in EVA Nanocomposites. Mater (Basel). 2020;13:3809.
doi: 10.3390/ma13173809
Du Plessis PI, Gazley MF, Tay SL, Trunfull EF, Knorsch M, Branch T, et al. Quantification of Kaolinite and Halloysite using machine learning from FTIR, XRF, and Brightness Data. Minerals. 2021;11:1350.
doi: 10.3390/min11121350
Lazzara G, Bruno F, Brancato D, Sturiale V, D’Amico AG, Miloto S et al. Biocompatibility analysis of halloysite clay nanotubes. Mater Lett. 2023;336.
Fahimizadeh M, Wong LW, Baifa Z, Sadjadi S, Auckloo SAB, Palaniandy K et al. Halloysite clay nanotubes: innovative applications by smart systems. Appl Clay Sci. 2024;251.
Vuluga Z, Corobea MC, Elizetxea C, Ordonez M, Ghiurea M, Raditoiu V et al. Morphological and tribological properties of PMMA/halloysite nanocomposites. Polym (Basel). 2018;10.
Deepak R, Agrawal YK. Study of nanocomposites with emphasis to halloysite nanotubes. Rev Adv Mater Sci. 2012;32:149–57.
Salaman AJ, Al-Obaidi AA, Takriff MS. Enhancing morphology and compression properties of halloysite reinforced polyurethane nanocomposites using injection-moulding technique. Results Phys. 2019;14:102507.
doi: 10.1016/j.rinp.2019.102507
G R, G R, Hashmi NSRC. Enhancement of mechanical properties of epoxy/halloysite nanotube (HNT) nanocomposites. SN Appl Sci. 2019;1:296.
doi: 10.1007/s42452-019-0323-9
Barot T, Rawtani D, Kulkarni P. Physicochemical and biological assessment of silver nanoparticles immobilized Halloysite nanotubes-based resin composite for dental applications. Heliyon. 2020;6:e03601.
doi: 10.1016/j.heliyon.2020.e03601
pubmed: 32195405
pmcid: 7078557
Skallevold HE, Rokaya D, Khurshid Z, Zafar MS. Bioactive glass applications in dentistry. Int J Mol Sci. 2019;20:5960.
doi: 10.3390/ijms20235960
pubmed: 31783484
pmcid: 6928922
Samad HA, Jaafar M, Othman R, Kawashita M, Razak NHA. New bioactive glass-ceramic: synthesis and application in PMMA bone cement composites. Biomed Mater Eng. 2011;21:247–58.