Enhancing anti-adhesion properties by designing microstructure - the microscopy and spectroscopy study of the intercellular bacterial response.
Journal
Scientific reports
ISSN: 2045-2322
Titre abrégé: Sci Rep
Pays: England
ID NLM: 101563288
Informations de publication
Date de publication:
19 Oct 2024
19 Oct 2024
Historique:
received:
07
06
2024
accepted:
01
10
2024
medline:
20
10
2024
pubmed:
20
10
2024
entrez:
19
10
2024
Statut:
epublish
Résumé
This study is the first one that investigates in detail the bacterial intercellular response to the high density of crystallographic defects including vacancies created in Cu by high pressure torsion. To this aim, samples were deformed by high pressure torsion and afterward, their antibacterial properties against Staphylococcus aureus were analyzed in adhesion tests. As a reference an annealed sample was applied. To avoid the influence of surface roughness, specially elaborated conditions for surface preparation were employed, which do not introduce defects and assure comparable surface roughness. The analysis of the chemical composition and thickness of passive layers by X-ray photoelectron spectroscopy showed that they were comparable for nanostructured and micrograined samples, consisting of Cu
Identifiants
pubmed: 39426980
doi: 10.1038/s41598-024-75045-5
pii: 10.1038/s41598-024-75045-5
doi:
Substances chimiques
Copper
789U1901C5
Anti-Bacterial Agents
0
cuprous oxide
T8BEA5064F
Types de publication
Journal Article
Langues
eng
Sous-ensembles de citation
IM
Pagination
24549Subventions
Organisme : National Science Centre, Poland
ID : Sonata bis, UMO-2021/42/E/ST5/00118
Organisme : Warsaw University of Technology within the Excellence Initiative: Research University (IDUB) program
ID : Mobility WUT V
Organisme : Impulse-und Net-working fund of the Helmholtz Association
ID : FKZ VH-VI-442 Memriox
Organisme : Helmholtz Energy Materials Characterization Platform
ID : 03ET7015
Informations de copyright
© 2024. The Author(s).
Références
Yasuyuki, M. et al. Antibacterial properties of nine pure metals: a laboratory study using Staphylococcus aureus and Escherichia coli. Biofouling. 26, 851–858. https://doi.org/10.1080/08927014.2010.527000 (2010).
doi: 10.1080/08927014.2010.527000
pubmed: 20938849
Casey, A. L. et al. Role of copper in reducing hospital environment contamination. J. Hosp. Infect.74, 72–77. https://doi.org/10.1016/j.jhin.2009.08.018 (2010).
doi: 10.1016/j.jhin.2009.08.018
pubmed: 19931938
Konieczny, J. & Rdzawski, Z. Antibacterial properties of copper and its alloys. Arch. Mater. Sci. Eng.56, 53–60 (2012).
Zhao, J. et al. Effect of surface passivation on corrosion resistance and antibacterial properties of Cu-bearing 316L stainless steel. Appl. Surf. Sci.386, 371–380. https://doi.org/10.1016/j.apsusc.2016.06.036 (2016).
doi: 10.1016/j.apsusc.2016.06.036
Parmar, V. et al. Relationship between dislocation density and antibacterial activity of cryo-rolled and cold-rolled copper. Mater. (Basel). 12, 1–11. https://doi.org/10.3390/ma12020200 (2019).
doi: 10.3390/ma12020200
Wang, S. et al. Antibacterial nanostructured copper coatings deposited on tantalum by magnetron sputtering. Mater. Technol.30, B120–B125. https://doi.org/10.1179/1753555714Y.0000000188 (2015).
doi: 10.1179/1753555714Y.0000000188
Sun, Y., Zhang, Z., Qin, Y., Xu, X. & Yang, S. The effect of rotation accelerated shot peening on mechanical property and antimicrobial activity of pure copper. Surf. Coat. Technol.384, 125319. https://doi.org/10.1016/j.surfcoat.2019.125319 (2020).
doi: 10.1016/j.surfcoat.2019.125319
Sundberg, K. et al. The Effect of Nano-Scale Surface Roughness on Copper Cold Spray inactivation of Influenza A Virus. Int. J. Nanotechnol Med. Eng.4, 33–40 (2019).
Ungár, T., Tichy, G., Gubicza, J. & Hellmig, R. Correlation between subgrains and coherently scattering domains. Powder Diffr.20, 366–375. https://doi.org/10.1154/1.2135313 (2005).
doi: 10.1154/1.2135313
Hirano, M., Hashimoto, M., Miura, K. & Ohtsu, N. Fabrication of antibacterial nanopillar surface on AISI 316 stainless steel through argon plasma etching with direct current discharge. Surf. Coat. Technol.406, 126680. https://doi.org/10.1016/j.surfcoat.2020.126680 (2021).
doi: 10.1016/j.surfcoat.2020.126680
Wu, S. et al. Role of the Surface Nanoscale Roughness of Stainless Steel on bacterial adhesion and microcolony formation. ACS Omega. 3, 6456–6464. https://doi.org/10.1021/acsomega.8b00769 (2018).
doi: 10.1021/acsomega.8b00769
pubmed: 30023948
pmcid: 6045408
Wang, P. J., Ma, L. W., Cheng, X. & Li, X. G. Influence of grain refinement on the corrosion behavior of metallic materials: a review. Int. J. Miner. Metall. Mater28, 1112–1126. https://doi.org/10.1007/s12613-021-2308-0 (2021).
doi: 10.1007/s12613-021-2308-0
Mitra, D., Kang, E. T. & Neoh, K. G. Antimicrobial copper-based materials and Coatings: potential multifaceted Biomedical Applications. ACS Appl. Mater. Interfaces. 12, 21159–21182. https://doi.org/10.1021/acsami.9b17815 (2020).
doi: 10.1021/acsami.9b17815
pubmed: 31880421
Warnes, S. L., Caves, V. & Keevil, C. W. Mechanism of copper surface toxicity in Escherichia coli O157:H7 and Salmonella involves immediate membrane depolarization followed by slower rate of DNA destruction which differs from that observed for Gram-positive bacteria. Environ. Microbiol.14, 1730–1743. https://doi.org/10.1111/j.1462-2920.2011.02677.( (2012).
doi: 10.1111/j.1462-2920.2011.02677.(
pubmed: 22176893
Edalati, K. et al. Nanomaterials by severe plastic deformation: review of historical developments and recent advances. Mater. Res. Lett.10, 163–256. https://doi.org/10.1080/21663831.2022.2029779 (2022).
doi: 10.1080/21663831.2022.2029779
Valiev, R. Z. et al. Producing Bulk Ultrafine-Grained materials by severe plastic deformation: ten years later. JOM. 68, 1216–1226 (2016).
doi: 10.1007/s11837-016-1820-6
Sauvage, X., Wilde, G., Divinski, S. V., Horita, Z. & Valiev, R. Z. Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena. Mater. Sci. Eng.A540, 1–12. https://doi.org/10.1016/j.msea.2012.01.080 (2012).
doi: 10.1016/j.msea.2012.01.080
Krawczynska, A. T., Lewandowska, M., Pippan, R. & Kurzydlowski, K. J. The effect of high pressure torsion on structural refinement and mechanical properties of an austenitic stainless steel. J. Nanosci. Nanotechnol. 13, 3246–3249. https://doi.org/10.1166/jnn.2013.7468 (2013).
doi: 10.1166/jnn.2013.7468
pubmed: 23858838
Krawczyńska, A. T. et al. Impact of high pressure torsion processing on Helium ion irradiation resistance of molybdenum. Mater. Charact.191, 112151. https://doi.org/10.1016/j.matchar.2022.112151 (2022).
doi: 10.1016/j.matchar.2022.112151
Edalati, K. et al. Impact of severe plastic deformation on kinetics and thermodynamics of hydrogen storage in magnesium and its alloys. J. Mater. Sci. Technol.146, 221–239. https://doi.org/10.1016/j.jmst.2022.10.068 (2023).
doi: 10.1016/j.jmst.2022.10.068
Weissitsch, L., Staab, F., Durst, K. & Bachmaier, A. Magnetic materials via high-pressure torsion of powders. Mater. Trans.64, 1537–1550. https://doi.org/10.2320/matertrans.MT-MF2022026 (2023).
doi: 10.2320/matertrans.MT-MF2022026
Setman, D., Schafler, E., Korznikova, E. & Zehetbauer, M. J. The presence and nature of vacancy type defects in nanometals detained by severe plastic deformation. Mater. Sci. Eng.A493, 116–122. https://doi.org/10.1016/j.msea.2007.06.093 (2008).
doi: 10.1016/j.msea.2007.06.093
Čížek, J. et al. Evolution of defects in copper deformed by high-pressure torsion. Acta Mater.59, 2322–2329. https://doi.org/10.1016/j.actamat.2010.12.028 (2011).
doi: 10.1016/j.actamat.2010.12.028
Ohkubo, H. et al. Positron annihilation study of vacancy-type defects in high-speed deformed Ni, Cu and Fe. Mater. Sci. Eng.A350, 95–101. https://doi.org/10.1016/S0921-5093(02)00705-0 (2003).
doi: 10.1016/S0921-5093(02)00705-0
Čížek, J. et al. The development of vacancies during severe plastic deformation. Mater. Trans.60, 1533–1542. https://doi.org/10.2320/matertrans.MF201937 (2019).
doi: 10.2320/matertrans.MF201937
Keil, P., Lützenkirchen-Hecht, D. & Frahm, R. Investigation of Room Temperature Oxidation of Cu in Air by Yoneda-XAFS. AIP Conf. Proc.882 https://doi.org/10.1063/1.2644569 (2007).
Pal, S., Tak, Y. K. & Song, J. M. Does the antibacterial activity of silver nanoparticles depend on the shape of the nanoparticle? A study of the gram-negative bacterium Escherichia coli. Appl. Environ. Microbiol.73, 1712–1720. https://doi.org/10.1128/AEM.02218-06 (2007).
doi: 10.1128/AEM.02218-06
pubmed: 17261510
pmcid: 1828795
Gonçalves, R. A. et al. Copper-nanoparticle-coated fabrics for Rapid and sustained antibacterial activity applications. ACS Appl. Nano Mater.5, 12876–12886. https://doi.org/10.1021/acsanm.2c02736 (2022).
doi: 10.1021/acsanm.2c02736
Sacher, E. Comment on ‘high-Resolution Microscopical studies of Contact Killing mechanisms on copper-based surfaces’. ACS Appl. Mater. Interfaces. 14, 16959–16960. https://doi.org/10.1021/acsami.2c03324 (2022).
doi: 10.1021/acsami.2c03324
pubmed: 35380799
Sousa, B. C., Sundberg, K. L., Gleason, M. A. & Cote, D. L. Understanding the antipathogenic performance of nanostructured and conventional copper cold spray material consolidations and coated surfaces. Crystals10, 1–43. https://doi.org/10.3390/cryst10060504 (2020).
doi: 10.3390/cryst10060504
Salah, I., Parkin, I. P. & Allan, E. Copper as an antimicrobial agent: recent advances. RSC Adv.11, 18179–18186 (2021).
doi: 10.1039/D1RA02149D
pubmed: 35480904
pmcid: 9033467
Zhang, E. et al. Antibacterial metals and alloys for potential biomedical implants. Bioact Mater.6, 2569–2612 (2021).
pubmed: 33615045
pmcid: 7876544
Champagne, V., Sundberg, K. & Helfritch, D. Kinetically deposited copper antimicrobial surfaces. Coatings. 9, 1–9. https://doi.org/10.3390/coatings9040257 (2019).
doi: 10.3390/coatings9040257
Sousa, B. C., Massar, C. J., Gleason, M. A. & Cote, D. L. On the emergence of antibacterial and antiviral copper cold spray coatings. J. Biol. Eng.15, 1–15. https://doi.org/10.1186/s13036-021-00256-7 (2021).
doi: 10.1186/s13036-021-00256-7
Zhang, Y., Brodusch, N., Descartes, S., Chromik, R. R. & Gauvin, R. Microstructure refinement of cold-sprayed copper investigated by electron channeling contrast imaging. Microsc Microanal. 20, 1499–1506. https://doi.org/10.1017/S1431927614001664 (2014).
doi: 10.1017/S1431927614001664
pubmed: 24960434
Yu, Z. et al. Reactive oxygen species-related nanoparticle toxicity in the Biomedical Field. Nanoscale Res. Lett.15, (2020).
Chang, T. et al. High-resolution Microscopical studies of Contact Killing mechanisms on copper-based surfaces. ACS Appl. Mater. Interfaces. 13, 49402–49413. https://doi.org/10.1021/acsami.1c11236 (2021).
doi: 10.1021/acsami.1c11236
pubmed: 34618446
pmcid: 8532116
Das, S. K., Liang, J., Schmidt, M., Laffir, F. & Marsili, E. Biomineralization mechanism of gold by Zygomycete Fungi, Rhizopous Oryzae. ACS Nano. 6, 6165–6173. https://doi.org/10.1021/nn301502s (2012).
doi: 10.1021/nn301502s
pubmed: 22708541
Łyżeń, R., Gawron, G., Kadziński, L. & Banecki, B. GSH protects the Escherichia coli cells from high concentrations of Thymoquinone. Molecules. 27, 2546. https://doi.org/10.3390/molecules27082546 (2022).
doi: 10.3390/molecules27082546
pubmed: 35458746
pmcid: 9029668
Ku, J. W. K. & Gan, Y. H. New roles for glutathione: modulators of bacterial virulence and pathogenesis. Redox Biol.44, 102012. https://doi.org/10.1016/j.redox.2021.102012 (2021).
doi: 10.1016/j.redox.2021.102012
pubmed: 34090244
pmcid: 8182430
Arts, I. S., Gennaris, A. & Collet, J. F. Reducing systems protecting the bacterial cell envelope from oxidative damage. FEBS Lett.589, 1559–1568. https://doi.org/10.1016/j.febslet.2015.04.057 (2015).
doi: 10.1016/j.febslet.2015.04.057
pubmed: 25957772
Cassier-Chauvat, C., Marceau, F., Farci, S., Ouchane, S. & Chauvat, F. The glutathione system: a journey from Cyanobacteria to higher eukaryotes. Antioxidants. 12, 1199. https://doi.org/10.3390/antiox12061199 (2023).
doi: 10.3390/antiox12061199
pubmed: 37371929
pmcid: 10295655
Dupont, C. L., Rensing, C. & Dupont, C. L. Copper toxicity and the origin of bacterial resistance — new insights and applications. Metallomics MINIREVIEW. 3, 1109–1118. https://doi.org/10.1039/c1mt00107h (2011).
doi: 10.1039/c1mt00107h
Wejrzanowski, T., Spychalski, W., Różniatowski, K. & Kurzydłowski, K. Image based analysis of Complex microstructures of Engineering materials. Int. J. Appl. Math. Comput. Sci.18, 33–39. https://doi.org/10.2478/v10006-008-0003-1 (2008).
doi: 10.2478/v10006-008-0003-1
Wejrzanowski, T., Lewandowska, M. & Kurzydłowski, K. J. Stereology of nano-materials. Image Anal. Stereol. 29, 1–12. https://doi.org/10.5566/ias.v29 (2010).
doi: 10.5566/ias.v29
Liedke, M. O. et al. Open volume defects and magnetic phase transition in Fe60Al40 transition metal aluminide. J. Appl. Phys117. 117 163908. https://doi.org/10.1063/1.4919014 (2015).
doi: 10.1063/1.4919014
Anwanda, W., Brauer, G., Butterling, M., Kissener, H. R. & Wagner, A. Design and construction of a slow Positron Beam for Solid and Surface investigations. Defect Diffus. Forum. 331, 25–40. https://doi.org/10.4028/ (2012). www.scientific.net/DDF.331.25
doi: 10.4028/www.scientific.net/DDF.331.25
Dryzek, J. & Horodek, P. GEANT4 simulation of slow positron beam implantation profiles. Nucl. Instrum. Methods Phys. Res. B. 266, 4000–4009. https://doi.org/10.1016/j.nimb.2008.06.033 (2008).
doi: 10.1016/j.nimb.2008.06.033
Auguste, R. et al. (ed, R.) In situ measurements of non-equilibrium positron state defects during he irradiation in Si. J. Appl. Phys.133 185901 https://doi.org/10.1063/5.0144308 (2023).
doi: 10.1063/5.0144308
Čížek, J. et al. Characterization of quenched-in vacancies in Fe-Al alloys. Phys. B Condens. Matter. 407, 2659–2664. https://doi.org/10.1016/j.physb.2011.12.122 (2012).
doi: 10.1016/j.physb.2011.12.122
Čížek, J. et al. Thermal stability of ultrafine grained copper. Phys. Rev. B - Condens. Matter Mater. Phys.65, 1–16. https://doi.org/10.1103/PhysRevB.65.094106 (2002).
doi: 10.1103/PhysRevB.65.094106
van Veen, A. et al. VEPFIT applied to depth profiling problems. Appl. Surf. Sci.85, 216–224. https://doi.org/10.1016/0169-4332(94)00334-3 (1995).
doi: 10.1016/0169-4332(94)00334-3
Wagner, A., Butterling, M., Liedke, M. O. & Potzger, K. & Krause-rehberg, R. Spectroscopy at the ELBE Facility. 040003, (2018). https://doi.org/10.1063/1.5040215
Hirschmann, E. et al. A new system for real-time data acquisition and pulse parameterization for digital positron annihilation lifetime spectrometers with high repetition rates. J. Instrumentation16. P08001. https://doi.org/10.1088/1748-0221/16/08/P08001 (2021).
Krause-Rehberg, R. & Leipner, H. S. Positron Annihilation in Semiconductors: Defect Studies (Springer-, 1999).
doi: 10.1007/978-3-662-03893-2
Olsen, J. V., Kirkegaard, P., Pedersen, N. J. & Eldrup, M. PALSfit: a new program for the evaluation of positron lifetime spectra. Physica Status Solidi C4, 4004–4006. https://doi.org/10.1002/pssc.200675868 (2007).
doi: 10.1002/pssc.200675868
Tuomisto, F. & Makkonen, I. Defect identification in semiconductors with positron annihilation: experiment and theory. Rev. Mod. Phys.85, 1583–1631. https://doi.org/10.1103/revmodphys.85.1583 (2013).
doi: 10.1103/revmodphys.85.1583