Power production waste.
flue gas desulfurization gypsum
fly ash
hazardous trace elements
nuclear power plant wastes
power production wastes
spent catalyst
Journal
Water environment research : a research publication of the Water Environment Federation
ISSN: 1554-7531
Titre abrégé: Water Environ Res
Pays: United States
ID NLM: 9886167
Informations de publication
Date de publication:
Oct 2019
Oct 2019
Historique:
received:
04
03
2019
revised:
04
07
2019
accepted:
07
08
2019
pubmed:
14
8
2019
medline:
12
10
2019
entrez:
14
8
2019
Statut:
ppublish
Résumé
In this paper, the research literatures published in 2018 about power production waste generated from the coal-fired power plants and nuclear power plants are reviewed. The wastes from coal-fired plants include fly ash, flue gas desulfurization gypsum, spent selective catalytic reduction catalyst, hazardous trace elements, and the management, reuse, and disposal of these wastes are discussed. The treatment and disposal of wastes generated from nuclear power plants is also considered. PRACTITIONER POINTS: Reuse and disposal of coal-fired and nuclear power plant waste is discussed in this annual literature review. Emission of hazardous trace elements from coal-fired power plant is summarized. Radiological contaminant removal and radionuclides waste disposal is essential for nuclear power plant.
Substances chimiques
Coal
0
Coal Ash
0
Trace Elements
0
Types de publication
Journal Article
Review
Langues
eng
Sous-ensembles de citation
IM
Pagination
1091-1096Subventions
Organisme : National Natural Science Foundation of China
ID : 51578068
Informations de copyright
© 2019 Water Environment Federation.
Références
Bevara, S., Giri, P., Patwe, S. J., Achary, S. N., Mishra, R. K., Kumar, A., … Tyagi, A. K. (2018). Separation of 90Sr from nuclear waste by crystalline complex phosphates of Ce(IV) and Zr(IV). Journal of Environmental Chemical Engineering, 6(2), 2248-2261. https://doi.org/10.1016/j.jece.2018.03.013
Bicer, A. (2018). Effect of fly ash particle size on thermal and mechanical properties of fly ash-cement composites. Thermal Science and Engineering Progress, 8, 78-82. https://doi.org/10.1016/j.tsep.2018.07.014
Caillahua, M. C., & Moura, F. J. (2018). Technical feasibility for use of FGD gypsum as an additive setting time retarder for Portland cement. Journal of Materials Research and Technology, 7(2), 190-197. https://doi.org/10.1016/j.jmrt.2017.08.005
Castillo, X., Pizarro, J., Ortiz, C., Cid, H., Flores, M., De Canck, E., & Van Der Voort, P. (2018). A cheap mesoporous silica from fly ash as an outstanding adsorbent for sulfate in water. Microporous and Mesoporous Materials, 272, 184-192. https://doi.org/10.1016/j.micromeso.2018.06.014
Choi, I.-H., Moon, G., Lee, J.-Y., & Jyothi, R. K. (2018). Extraction of tungsten and vanadium from spent selective catalytic reduction catalyst for stationary application by pressure leaching process. Journal of Cleaner Production, 197, 163-169. https://doi.org/10.1016/j.jclepro.2018.06.196
Cui, J., Duan, L., Jiang, Y., Zhao, C., & Anthony, E. J. (2018). Migration and emission of mercury from circulating fluidized bed boilers co-firing petroleum coke and coal. Fuel, 215, 638-646. https://doi.org/10.1016/j.fuel.2017.11.062
Dai, Z., Wang, L., Tang, H., Sun, Z., Liu, W., Sun, Y., … Xiang, J. (2018). Speciation analysis and leaching behaviors of selected trace elements in spent SCR catalyst. Chemosphere, 207, 440-448. https://doi.org/10.1016/j.chemosphere.2018.05.119
Dhanke, P., Patil, A., Kore, V., & Kanse, N. (2018). Phosphate removal from waste effluent using improved fly ash. Materials Today: Proceedings, 5(9), 17889-17894. https://doi.org/10.1016/j.matpr.2018.06.116
Diao, X., Yuan, C.-G., Wu, J., Gui, B., Zhang, K., & Zhang, C. (2018). Mercury release and fraction transformation during desulfurization gypsum aging process (UV irradiation). Fuel, 217, 522-528. https://doi.org/10.1016/j.fuel.2017.12.120
Du, W., Zhang, C.-Y., Kong, X.-M., Zhuo, Y.-Q., & Zhu, Z.-W. (2018). Mercury release from fly ashes and hydrated fly ash cement pastes. Atmospheric Environment, 178, 11-18. https://doi.org/10.1016/j.atmosenv.2018.01.033
Duan, S., Liao, H., Cheng, F., Song, H., & Yang, H. (2018). Investigation into the synergistic effects in hydrated gelling systems containing fly ash, desulfurization gypsum and steel slag. Construction and Building Materials, 187, 1113-1120. https://doi.org/10.1016/j.conbuildmat.2018.07.241
García-Gutiérrez, M., Missana, T., Mingarro, M., Morejón, J., & Cormenzana, J. L. (2018). Cesium diffusion in mortars from different cements used in radioactive waste repositories. Applied Geochemistry, 98, 10-16. https://doi.org/10.1016/j.apgeochem.2018.09.001
Golewski, G. L. (2018). Effect of curing time on the fracture toughness of fly ash concrete composites. Composite Structures, 185, 105-112. https://doi.org/10.1016/j.compstruct.2017.10.090
Goscianska, J., Ptaszkowska-Koniarz, M., Frankowski, M., Franus, M., Panek, R., & Franus, W. (2018). Removal of phosphate from water by lanthanum-modified zeolites obtained from fly ash. Journal of Colloid and Interface Science, 513, 72-81. https://doi.org/10.1016/j.jcis.2017.11.003
He, K., Li, X., & Dong, L. (2018). The effects of flue gas desulfurization gypsum (FGD gypsum) on P fractions in a coastal plain soil. Journal of Soils and Sediments, 18(3), 804-815. https://doi.org/10.1007/s11368-017-1821-2
Hefni, Y., Zaher, Y. A. E., & Wahab, M. A. (2018). Influence of activation of fly ash on the mechanical properties of concrete. Construction and Building Materials, 172, 728-734. https://doi.org/10.1016/j.conbuildmat.2018.04.021
Jiang, F., Zhang, L., Mukiza, E., Qi, Z., & Cang, D. (2018). Formation mechanism of high apparent porosity ceramics prepared from fly ash cenosphere. Journal of Alloys and Compounds, 749, 750-757. https://doi.org/10.1016/j.jallcom.2018.03.303
Jiang, L., Li, C., Wang, C., Xu, N., & Chu, H. (2018). Utilization of flue gas desulfurization gypsum as an activation agent for high-volume slag concrete. Journal of Cleaner Production, 205, 589-598. https://doi.org/10.1016/j.jclepro.2018.09.145
Kang, J., Hu, Y., Sun, W., Liu, R., Gao, Z., Guan, Q., … Yin, Z. (2018). Utilisation of FGD gypsum for silicate removal from scheelite flotation wastewater. Chemical Engineering Journal, 341, 272-279. https://doi.org/10.1016/j.cej.2018.02.043
Karanac, M., Đolić, M., Veljović, Đ., Rajaković-Ognjanović, V., Veličković, Z., Pavićević, V., & Marinković, A. (2018). The removal of Zn2+, Pb2+, and As(V) ions by lime activated fly ash and valorization of the exhausted adsorbent. Waste Management, 78, 366-378. https://doi.org/10.1016/j.wasman.2018.05.052
Kirishima, A., Hirano, M., Akiyama, D., Sasaki, T., & Sato, N. (2018). Study on the leaching behavior of actinides from nuclear fuel debris. Journal of Nuclear Materials, 502, 169-176. https://doi.org/10.1016/j.jnucmat.2018.02.018
Lanzerstorfer, C. (2018). Pre-processing of coal combustion fly ash by classification for enrichment of rare earth elements. Energy Reports, 4, 660-663. https://doi.org/10.1016/j.egyr.2018.10.010
Li, C., Duan, Y., Tang, H., Zhu, C., Li, Y.-N., Zheng, Y., & Liu, M. (2018). Study on the Hg emission and migration characteristics in coal-fired power plant of China with an ammonia desulfurization process. Fuel, 211, 621-628. https://doi.org/10.1016/j.fuel.2017.09.083
Li, J., Zhuang, X., Monfort, E., Querol, X., Llaudis, A. S., Font, O., … Izquierdo, M. (2018). Utilization of coal fly ash from a Chinese power plant for manufacturing highly insulating foam glass: Implications of physical, mechanical properties and environmental features. Construction and Building Materials, 175, 64-76. https://doi.org/10.1016/j.conbuildmat.2018.04.158
Li, M., Liu, B., Wang, X., Yu, X., Zheng, S., Du, H., … Zhang, Y. (2018). A promising approach to recover a spent SCR catalyst: Deactivation by arsenic and alkaline metals and catalyst regeneration. Chemical Engineering Journal, 342, 1-8. https://doi.org/10.1016/j.cej.2017.12.132
Li, Y., Lu, J., Zeng, Y., Liu, Z., & Wang, C. (2018). Preparation and characterization of mullite powders from coal fly ash by the mullitization and hydrothermal processes. Materials Chemistry and Physics, 213, 518-524. https://doi.org/10.1016/j.matchemphys.2018.04.056
Qiu, R., Cheng, F., & Huang, H. (2018). Removal of Cd2+ from aqueous solution using hydrothermally modified circulating fluidized bed fly ash resulting from coal gangue power plant. Journal of Cleaner Production, 172, 1918-1927. https://doi.org/10.1016/j.jclepro.2017.11.236
Shi, Y., Zhang, P., Fang, T., Gao, E., Xi, F., Shou, T., … Pan, H. (2018). In situ regeneration of commercial NH3-SCR catalysts with high-temperature water vapor. Catalysis Communications, 116, 57-61. https://doi.org/10.1016/j.catcom.2018.08.009
Song, C., Zhou, D., Yang, L., Zhou, J., Liu, C., & Chen, Z.-G. (2018). Recovery TiO2 and sodium titanate nanowires as Cd(II) adsorbent from waste V2O5 -WO3/TiO2 selective catalytic reduction catalysts by Na2CO3-NaCl-KCl molten salt roasting method. Journal of the Taiwan Institute of Chemical Engineers, 88, 226-233. https://doi.org/10.1016/j.jtice.2018.04.006
Stolz, J., Boluk, Y., & Bindiganavile, V. (2018). Mechanical, thermal and acoustic properties of cellular alkali activated fly ash concrete. Cement and Concrete Composites, 94, 24-32. https://doi.org/10.1016/j.cemconcomp.2018.08.004
Su, Q., Miao, J., Li, H., Chen, Y., Chen, J., & Wang, J. (2018). Optimizing vanadium and tungsten leaching with lowered silicon from spent SCR catalyst by pre-mixing treatment. Hydrometallurgy, 181, 230-239. https://doi.org/10.1016/j.hydromet.2018.10.003
Tabatabai, H., Janbaz, M., & Nabizadeh, A. (2018). Mechanical and thermo-gravimetric properties of unsaturated polyester resin blended with FGD gypsum. Construction and Building Materials, 163, 438-445. https://doi.org/10.1016/j.conbuildmat.2017.12.041
Taggart, R. K., Hower, J. C., & Hsu-Kim, H. (2018). Effects of roasting additives and leaching parameters on the extraction of rare earth elements from coal fly ash. International Journal of Coal Geology, 196, 106-114. https://doi.org/10.1016/j.coal.2018.06.021
Tanvar, H., Chauhan, S., & Dhawan, N. (2018). Extraction of aluminum values from fly ash. Materials Today: Proceedings, 5(9), 17055-17063. https://doi.org/10.1016/j.matpr.2018.04.112
Tauanov, Z., Tsakiridis, P. E., Mikhalovsky, S. V., & Inglezakis, V. J. (2018). Synthetic coal fly ash-derived zeolites doped with silver nanoparticles for mercury (II) removal from water. Journal of Environmental Management, 224, 164-171. https://doi.org/10.1016/j.jenvman.2018.07.049
Teng, W., Wang, J., Wu, J., Du, Y., Jia, X.-J., Li, H., & Wang, T. (2018). Rapid synthesis of alpha calcium sulfate hemihydrate whiskers in glycerol-water solution by using flue-gas-desulfurization gypsum solid waste. Journal of Crystal Growth, 496-497, 24-30. https://doi.org/10.1016/j.jcrysgro.2018.05.008
Theodosiou, A., Jones, A. N., Burton, D., Powell, M., Rogers, M., & Livesey, V. B. (2018). The complete oxidation of nuclear graphite waste via thermal treatment: An alternative to geological disposal. Journal of Nuclear Materials, 507, 208-217. https://doi.org/10.1016/j.jnucmat.2018.05.002
Wang, Y., Ge, D., Chen, M., Gao, S., & Wu, Z. (2018). A dual-functional way for regenerating NH3-SCR catalysts while enhancing their poisoning resistance. Catalysis Communications, 117, 69-73. https://doi.org/10.1016/j.catcom.2018.08.028
Wenyi, T., Suping, G., Wei, X., Youxu, L., & Zixin, Z. (2018). Feature changes of mercury during the carbonation of FGD gypsum from different sources. Fuel, 212, 19-26. https://doi.org/10.1016/j.fuel.2017.09.119
Wu, W., Wang, C., Bao, W., & Li, H. (2018). Selective reduction leaching of vanadium and iron by oxalic acid from spent V2O5-WO3/TiO2 catalyst. Hydrometallurgy, 179, 52-59. https://doi.org/10.1016/j.hydromet.2018.05.021
Xu, Z., Okada, T., & Yonezawa, S. (2018). Cesium extraction from simulated high-level vitrified wastes. Progress in Nuclear Energy, 108, 34-42. https://doi.org/10.1016/j.pnucene.2018.05.008
Yang, T., Zhu, H., Zhang, Z., Gao, X., Zhang, C., & Wu, Q. (2018). Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes. Cement and Concrete Research, 109, 198-207. https://doi.org/10.1016/j.cemconres.2018.04.008
Zhang, H., Shen, C., Xi, P., Chen, K., Zhang, F., & Wang, S. (2018). Study on flexural properties of active magnesia carbonation concrete with fly ash content. Construction and Building Materials, 187, 884-891. https://doi.org/10.1016/j.conbuildmat.2018.08.017
Zhang, Y., Yu, P., Pan, F., & He, Y. (2018). The synergistic effect of AFt enhancement and expansion in Portland cement-aluminate cement-FGD gypsum composite cementitious system. Construction and Building Materials, 190, 985-994. https://doi.org/10.1016/j.conbuildmat.2018.09.139
Zhao, S., Duan, Y., Li, Y., Liu, M., Lu, J., Ding, Y., … Du, M. (2018). Emission characteristic and transformation mechanism of hazardous trace elements in a coal-fired power plant. Fuel, 214, 597-606. https://doi.org/10.1016/j.fuel.2017.09.093
Zhao, S., Duan, Y., Lu, J., Gupta, R., Pudasainee, D., Liu, S., … Lu, J. (2018). Thermal stability, chemical speciation and leaching characteristics of hazardous trace elements in FGD gypsum from coal-fired power plants. Fuel, 231, 94-100. https://doi.org/10.1016/j.fuel.2018.05.067
Zhao, Y., Wang, S., Li, Y., Liu, J., Zhuo, Y., Chen, H., … Sun, Z. (2018). Extensive reclamation of saline-sodic soils with flue gas desulfurization gypsum on the Songnen Plain, Northeast China. Geoderma, 321, 52-60. https://doi.org/10.1016/j.geoderma.2018.01.033