Fabrication and in-vitro characterization of a polymeric aortic valve for minimally invasive valve replacement.

The valve replacement therapy is the standard treatment for severe heart valve diseases. Nowadays, two types of commercial prosthesis are available: mechanical and biological, but both of them have severe limitations. Moreover, alternative therapeutic approach for valve replacement, based on minimally invasive techniques (MIAVR), motivates the search for new valve materials. In this study a polyurethane-based self-expandable tri-leaflets heart valve compatible with MIAVR procedure is proposed. The device is based on the development, fabrication and characterization of three different elements: the leaflets, the polymeric stent for supporting the leaflets, and the external metallic stent for anchoring the valve to the native aortic root. The polymeric stent and the valve leaflets were fabricated using a thermoplastic silicone-polycarbonate-urethane using 3D printing and spray technology while the external metallic stent was made in nickel titanium (Nitinol) to obtain a self-expandable valve after the crimping process. The three elements were assembled in the completed device and tested by crimping, fatigue and fluid-dynamic test. The novel polymeric valve proposed showed promising results about valve crimping capabilities, durability and fluid dynamic performances. This approach could offer advantages such as low cost and to produce a tailor-made device basing on patient's imaging data. Moreover, the selected biomaterial offers the potential to have a device that could need of permanent anticoagulation and lack of calcification.

Informations de copyright

Copyright © 2020 Elsevier Ltd. All rights reserved.