Large-scale fabrication of ion-selective electrodes for simultaneous detection of Na
Carbon nanomaterial
Ion-selective electrode
Mass-production
Point-of-care diagnosis
Wireless detection
Journal
Mikrochimica acta
ISSN: 1436-5073
Titre abrégé: Mikrochim Acta
Pays: Austria
ID NLM: 7808782
Informations de publication
Date de publication:
24 05 2023
24 05 2023
Historique:
received:
15
03
2023
accepted:
25
04
2023
medline:
26
5
2023
pubmed:
24
5
2023
entrez:
24
5
2023
Statut:
epublish
Résumé
A significant bottleneck exists for mass-production of ion-selective electrodes despite recent developments in manufacturing technologies. Here, we present a fully-automated system for large-scale production of ISEs. Three materials, including polyvinyl chloride, polyethylene terephthalate and polyimide, were used as substrates for fabricating ion-selective electrodes (ISEs) using stencil printing, screen-printing and laser engraving, respectively. We compared sensitivities of the ISEs to determine the best material for the fabrication process of the ISEs. The electrode surfaces were modified with various carbon nanomaterials including multi-walled carbon nanotubes, graphene, carbon black, and their mixed suspensions as the intermediate layer to enhance sensitivities of the electrodes. An automated 3D-printed robot was used for the drop-cast procedure during ISE fabrication to eliminate manual steps. The sensor array was optimized, and the detection limits were 10
Identifiants
pubmed: 37222781
doi: 10.1007/s00604-023-05818-8
pii: 10.1007/s00604-023-05818-8
doi:
Substances chimiques
Nanotubes, Carbon
0
Ions
0
Types de publication
Journal Article
Langues
eng
Sous-ensembles de citation
IM
Pagination
237Subventions
Organisme : National Research Council of Thailand
ID : NRCT5-TRG63001-02
Organisme : The Scientific and Technological Research Council of Turkey (TUBITAK)
ID : 122Z721
Organisme : The Scientific and Technological Research Council of Turkey (TUBITAK)
ID : 120N615
Informations de copyright
© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.
Références
Bagheri N, Mazzaracchio V, Cinti S, Colozza N, Di Natale C, Netti PA et al (2021) Electroanalytical sensor based on gold-nanoparticle-decorated paper for sensitive detection of copper ions in sweat and serum. Anal Chem 93:5225–5233
pubmed: 33739824
di Sant’Agnese PA, Darling RC, Perera GA, Shea E (1953) Abnormal electrolyte composition of sweat in cystic fibrosis of the pancreas: clinical significance and relationship to the disease. Pediatrics 12:549–563
pubmed: 13111855
Mahendran V, Philip J (2013) Sensing of biologically important cations such as Na
pubmed: 23477486
Riccardi D, Kemp PJ (2012) The calcium-sensing receptor beyond extracellular calcium homeostasis: conception, development, adult physiology, and disease. Annu Rev Physiol 74:271–297
pubmed: 22017175
Lehnhardt A, Kemper MJ (2011) Pathogenesis, diagnosis and management of hyperkalemia. Pediatr Nephrol 26:377–384
pubmed: 21181208
Donaldson SH, Boucher RC (2007) Sodium channels and cystic fibrosis. Chest 132:1631–1636
pubmed: 17998363
Adams J, Badolato M, Pierce E, Cantrell A, Parker Z, Farzam D (2021) Short-Term Stability of Urine Electrolytes: Effect of Time and Storage Conditions. Int J Sport Nutr Exerc Metab 1:1–3
Bobacka J, Ivaska A, Lewenstam A (2008) Potentiometric ion sensors. Chem Rev 108:329–351
pubmed: 18189426
Soda Y, Citterio D, Bakker E (2019) Equipment-free detection of K
pubmed: 30702271
Shao Y, Ying Y, Ping J (2020) Recent advances in solid-contact ion-selective electrodes: Functional materials, transduction mechanisms, and development trends. Chem Soc Rev 49:4405–4465
pubmed: 32458836
Yin T, Qin W (2013) Applications of nanomaterials in potentiometric sensors. TrAC, Trends Anal Chem 51:79–86
Paczosa-Bator B (2012) All-solid-state selective electrodes using carbon black. Talanta 93:424–427
pubmed: 22483932
Ozer T, Henry CS (2022) All-solid-state potassium-selective sensor based on carbon black modified thermoplastic electrode. Electrochim Acta 404:139762
Crespo GA, Gugsa D, Macho S, Rius FX (2009) Solid-contact pH-selective electrode using multi-walled carbon nanotubes. Anal Bioanal Chem 395:2371–2376
pubmed: 19760402
Ping J, Wang Y, Wu J, Ying Y (2011) Development of an all-solid-state potassium ion-selective electrode using graphene as the solid-contact transducer. Electrochem Commun 13:1529–1532
Bobacka J (2006) Conducting polymer-based solid-state ion-selective electrodes. Electroanalysis 18:7–18
Manjushree S, Adarakatti PS (2023) Recent advances in disposable electrochemical sensors. In: recent developments in green electrochemical sensors: design, performance, and applications. Am Chem Soc pp 1–21
Hjort RG, Soares RR, Li J, Jing D, Hartfiel L, Chen B et al (2022) Hydrophobic laser-induced graphene potentiometric ion-selective electrodes for nitrate sensing. Microchim Acta 189:122
Lee C-W, Jeong S-Y, Kwon Y-W, Lee J-U, Cho S-C, Shin B-S (2022) Fabrication of laser-induced graphene-based multifunctional sensing platform for sweat ion and human motion monitoring. Sens Actuators A 334:113320
Liao J, Zhang X, Sun Z, Chen H, Fu J, Si H et al (2022) Laser-induced graphene-based wearable epidermal ion-selective sensors for noninvasive multiplexed sweat analysis. Biosensors 12:397
pubmed: 35735545
pmcid: 9221044
van de Velde L, d’Angremont E, Olthuis W (2016) Solid contact potassium selective electrodes for biomedical applications–a review. Talanta 160:56–65
pubmed: 27591587
Ozer T, Agir I, Henry CS (2022) Rapid prototyping of ion-selective electrodes using a low-cost 3D printed internet-of-things (IoT) controlled robot. Talanta 247:123544
pubmed: 35598477
Ozer T, Agir I, Henry CS (2022) Low-cost Internet of Things (IoT)-enabled a wireless wearable device for detecting potassium ions at the point of care. Sens Actuators B Chem 365:131961
Ozer T, Henry CS (2022) Microfluidic-based ion-selective thermoplastic electrode array for point-of-care detection of potassium and sodium ions. Microchim Acta 189:1–12
Ozer T (2022) Carbon composite thermoplastic electrodes integrated with mini-printed circuit board for wireless detection of calcium ions. Anal Sci 38:1233–1243
pubmed: 35861910
Mikhelson KN (2013) Ionophore-Based ISEs. Springer, Ion-Selective Electrodes, pp 51–95
Lin J, Peng Z, Liu Y, Ruiz-Zepeda F, Ye R, Samuel EL et al (2014) Laser-induced porous graphene films from commercial polymers. Nat Commun 5:1–8
McNaught AD, Wilkinson A (1997) Compendium of chemical terminology. Blackwell Science, London
Bakker E, Pretsch E (2005) Potentiometric sensors for trace-level analysis. TrAC, Trends Anal Chem 24:199–207
Bakker E, Bühlmann P, Pretsch E (1997) Carrier-based ion-selective electrodes and bulk optodes. 1. General characteristics. Chem Rev 97:3083–132
pubmed: 11851486
Bühlmann P, Pretsch E, Bakker E (1998) Carrier-based ion-selective electrodes and bulk optodes. 2. Ionophores for potentiometric and optical sensors. Chem Rev 98:1593–688
pubmed: 11848943
Mazzaracchio V, Serani A, Fiore L, Moscone D, Arduini F (2021) All-solid state ion-selective carbon black-modified printed electrode for sodium detection in sweat. Electrochim Acta 394:139050
Pięk M, Piech R, Paczosa-Bator B (2016) The complex crystal of NaTCNQ–TCNQ supported on different carbon materials as ion-to-electron transducer in all-solid-state sodium-selective electrode. J Electrochem Soc 163:B573
Kang YJ, Chung H, Kim M-S, Kim W (2015) Enhancement of CNT/PET film adhesion by nano-scale modification for flexible all-solid-state supercapacitors. Appl Surf Sci 355:160–165
Rostampour M, Lawrence Jr DJ, Hamid Z, Darensbourg J, Calvo‐Marzal P, Chumbimuni‐Torres KY (2023) Highly reproducible flexible ion‐selective electrodes for the detection of sodium and potassium in artificial sweat. Electroanalysis 35:2200121
Choudhury S, Roy S, Bhattacharya G, Fishlock S, Deshmukh S, Bhowmick S et al (2021) Potentiometric ion-selective sensors based on UV-ozone irradiated laser-induced graphene electrode. Electrochim Acta 387:138341
Cinti S, Mazzaracchio V, Cacciotti I, Moscone D, Arduini F (2017) Carbon black-modified electrodes screen-printed onto paper towel, waxed paper and parafilm M®. Sensors 17:2267
pubmed: 28972566
pmcid: 5676850
Wan Z, Umer M, Lobino M, Thiel D, Nguyen N-T, Trinchi A et al (2020) Laser induced self-N-doped porous graphene as an electrochemical biosensor for femtomolar miRNA detection. Carbon 163:385–394
Lee J-H, Wee S-B, Kwon M-S, Kim H-H, Choi J-M, Song MS et al (2011) Strategic dispersion of carbon black and its application to ink-jet-printed lithium cobalt oxide electrodes for lithium ion batteries. J Power Sources 196:6449–6455
De Marco R, Veder J-P, Clarke G, Nelson A, Prince K, Pretsch E et al (2008) Evidence of a water layer in solid-contact polymeric ion sensors. Phys Chem Chem Phys 10:73–76
pubmed: 18075683
Bobacka J (1999) Potential stability of all-solid-state ion-selective electrodes using conducting polymers as ion-to-electron transducers. Anal Chem 71:4932–4937
pubmed: 21662838
Paczosa-Bator B, Cabaj L, Piech R, Skupień K (2012) Platinum nanoparticles intermediate layer in solid-state selective electrodes. Analyst 137:5272–5277
pubmed: 23042220
Paczosa-Bator B, Pięk M, Piech R (2015) Application of nanostructured TCNQ to potentiometric ion-selective K
pubmed: 25551547
Paczosa-Bator B (2014) Effects of type of nanosized carbon black on the performance of an all-solid-state potentiometric electrode for nitrate. Microchim Acta 181:1093–1099
Paczosa-Bator B, Cabaj L, Piech R, Skupień K (2013) Potentiometric sensors with carbon black supporting platinum nanoparticles. Anal Chem 85:10255–10261
pubmed: 24094044
Rousseau CR, Bühlmann P (2021) Calibration-free potentiometric sensing with solid-contact ion-selective electrodes. TrAC, Trends Anal Chem 140:116277