Versatile injector for inline renewable solid-phase extraction: Application to cyclodextrin-based bioaccessibility assessment in environmental solids.

BACKGROUND

Solid phase extraction (SPE) is a standard sample preparation technique in HPLC workflows. Inline cartridges are high-performance alternatives to manual or robotic systems but at long term, they suffer from irreversible sorption of matrix components and sorbent compaction. Bead injection (BI) is a niche fluidic technique that allows renewing a sorbent bed through the manipulation of its suspension. However, there is a need for a versatile and reliable tool in HPLC that can exchange the inline sorbent automatically, resorting to inexpensive and assorted bulk sorbents.

RESULTS

We present a new flow path for a liquid chromatographic injector to perform inline micro-solid phase extraction. The sample is processed at real time, trapping the analytes and discarding the matrix. Cleaning the matrix and injecting 10 μL of sample takes 70 s, comparable with the injection in commercial HPLC systems. If the aim is to preconcentrate the analytes, average enrichment factors of 250 have been obtained after processing sample volumes of 3200 μL in 16 min (interleavable with the chromatographic step), keeping the peak position and width independent of the injected volume (compared to large volume direct injection). The desired bed mass is automatically and pressure-driven manipulated in the valve, retained by an inline frit, and optionally, after the analysis, removed by forward flow. The chromatographic performance of the new design is compared to the standard 6-port, 2-position HPLC injector. As a case study, we have monitored the extraction kinetics of a cyclodextrin-based bioaccessibility extraction test of persistent organic contaminants in soil, by extracting several fractions in valve, process them with inline SPE with a balanced hydrophilic-hydrophobic reversed-phase sorbent, and inject the bioaccessible compounds into HPLC. Aiming at avoiding carryover, the sorbent bed (ca. 3 mg) is exchanged before every run. It should be noted that this contribution focuses on HPLC, but other non-separative techniques, such as Flow Injection Analysis, can equally benefit from this injection platform.

SIGNIFICANCE

This contribution reports the first use of inline BI-solid phase extraction in HPLC workflows, without heart-cut eluate injection, in which the sorbent can be exchanged automatically by forward flow. This performance is enabled by prototyping a valve that can autonomously swap sorbents in real-time for diverse samples, as a cartridge exchanger, but using cost-effective and environmentally friendlier bulk sorbents (bed masses from sub-mg to 5 mg) without requiring additional hardware.

Informations de copyright

Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.

Déclaration de conflit d'intérêts

Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: David J. Cocovi-Solberg reports equipment, drugs, or supplies was provided by Wacker Chemie AG. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.