Micromorphology and native extractive behaviour of wood powder.
Cytochemical staining
Drying
Extractive distribution
Milling techniques
Journal
Scientific reports
ISSN: 2045-2322
Titre abrégé: Sci Rep
Pays: England
ID NLM: 101563288
Informations de publication
Date de publication:
26 Oct 2024
26 Oct 2024
Historique:
received:
19
02
2024
accepted:
08
10
2024
medline:
27
10
2024
pubmed:
27
10
2024
entrez:
27
10
2024
Statut:
epublish
Résumé
The transition to a bioeconomy is attracting the use of wood powders for developing bio-based chemicals, fuels, and products to replace fossil-based products. Wood powder-based products depend on the properties and quality of wood powders. Despite many studies on their morphological and physical properties, studies on micromorphology and extractive micro-distribution are scarce. Here we investigated the effect of milling type and wood quality in terms of moisture content on microstructural changes and native extractive distribution in wood powders. The findings showed that non-dried and dried multi-blade shaft mill (MBSM) powders had smooth surfaces and less undamaged cellulosic fibre walls, and extractives were located in the cell lumen. Non-dried and dried hammer mill powders had a rough surface and fibres with structural deformations in their cell walls (e.g. dislocations). Extractives were redistributed on the particle surface as well as dispersed in the cell lumen for both types of hammer mill powders. In a word, the powders obtained from MBSM technology are more native in structure. The findings of the study can have implications for downstream processes.
Identifiants
pubmed: 39462001
doi: 10.1038/s41598-024-75716-3
pii: 10.1038/s41598-024-75716-3
doi:
Substances chimiques
Powders
0
Cellulose
9004-34-6
Types de publication
Journal Article
Langues
eng
Sous-ensembles de citation
IM
Pagination
25548Informations de copyright
© 2024. The Author(s).
Références
Fritsche, U. et al. Future transitions for the Bioeconomy towards Sustainable Development and a Climate-Neutral Economy - Foresight Scenarios for the EU bioeconomy in 2050, Borzacchiello, M. T., Stoermer, E. and Avraamides, M. editor(s), Publications Office of the European Union, Luxembourg, 2021, ISBN 978-92-76-28413-0, doi: https://doi.org/10.2760/763277 , JRC123532. Report No. JRC123532, (Publications Office of the European Union, Luxembourg,, 2021).
Verkerk, P. J., Cardellini, G., van Meijl, H. & Pyka, A. Future transitions for the Bioeconomy towards Sustainable Development and a Climate-Neutral Economy – Modelling needs to integrate all three aspects of sustainability, M’barek, R. (editor), Publications Office of the European Union, Luxembourg, 2021, ISBN 978-92-76-32323-5, doi: https://doi.org/10.2760/097710 , JRC124579., (Publications Office of the European Union, Luxembourg, 2021).
Gravelsins, R. J. & Trass, O. Analysis of grinding of pelletized wood waste with the Szego Mill. Powder Technology 245, 189–198 (2013). https://doi.org: https://doi.org/10.1016/j.powtec.2013.04.018
doi: 10.1016/j.powtec.2013.04.018
van der Stelt, M. J. C., Gerhauser, H., Kiel, J. H. A. & Ptasinski, K. J. Biomass upgrading by torrefaction for the production of biofuels: a review. Biomass and Bioenergy 35, 3748–3762 (2011). https://doi.org/10.1016/j.biombioe.2011.06.023
doi: 10.1016/j.biombioe.2011.06.023
Agarwal, U. P., Zhu, J. Y. & Ralph, S. A. Enzymatic hydrolysis of loblolly pine: effects of cellulose crystallinity and delignification. Holzforschung 67, 371–377 (2013). https://doi.org/10.1515/hf-2012-0116
doi: 10.1515/hf-2012-0116
Zhang, M., Song, X., Deines, T. W., Pei, Z. J. & Wang, D. Biofuel manufacturing from woody biomass: effects of sieve size used in biomass size reduction. J Biomed Biotechnol 2012, 581039 (2012). https://doi.org/10.1155/2012/581039
Das, A. K., Agar, D. A., Rudolfsson, M. & Larsson, S. H. A review on wood powders in 3D printing: processes, properties and potential applications. Journal of Materials Research and Technology 15, 241–255 (2021). https://doi.org/10.1016/j.jmrt.2021.07.110
doi: 10.1016/j.jmrt.2021.07.110
Kim, S. Y. et al. Surface modifications of organic fillers to improve the strength of paperboard. BioResources 10, 1174–1185 (2015). https://doi.org/10.15376/biores.10.1.1174-1185
Lee, J. Y. et al. Fundamental study on developing wood powder as an additive of paperboard. TAPPI Journal 13, 17–22 (2014). https://doi.org/10.32964/TJ13.11.17
doi: 10.32964/TJ13.11.17
Agar, D. A. et al. A systematic study of ring-die pellet production from forest and agricultural biomass. Fuel Processing Technology 180, 47–55 (2018). https://doi.org: https://doi.org/10.1016/j.fuproc.2018.08.006
Renner, K., Kenyó, C., Móczó, J. & Pukánszky, B. Micromechanical deformation processes in PP/wood composites: particle characteristics, adhesion, mechanisms. Composites Part A: Applied Science and Manufacturing 41, 1653–1661 (2010). https://doi.org/10.1016/j.compositesa.2010.08.001
doi: 10.1016/j.compositesa.2010.08.001
da Silva Barbosa Ferreira, E., Luna, C. B. B., Araújo, E. M., Siqueira, D. D. & Wellen, R. M. R. Polypropylene/wood powder/ethylene propylene diene monomer rubber-maleic anhydride composites: effect of PP melt flow index on the thermal, mechanical, thermomechanical, water absorption, and morphological parameters. Polymer Composites 42, 484–497 (2021). https://doi.org/10.1002/pc.25841
doi: 10.1002/pc.25841
Das, A. K., Agar, D. A., Thyrel, M. & Rudolfsson, M. Wood powder characteristics of green milling with the multi-blade shaft mill. Powder Technology 407, 117664 (2022). https://doi.org/10.1016/j.powtec.2022.117664
doi: 10.1016/j.powtec.2022.117664
Paulrud, S., Mattsson, J. E. & Nilsson, C. Particle and handling characteristics of wood fuel powder: effects of different mills. Fuel Processing Technology 76, 23–39 (2002). https://doi.org/10.1016/S0378-3820(02)00008-5
doi: 10.1016/S0378-3820(02)00008-5
Esteban, L. S. & Carrasco, J. E. Evaluation of different strategies for pulverization of forest biomasses. Powder Technology 166, 139–151 (2006). https://doi.org: https://doi.org/10.1016/j.powtec.2006.05.018
doi: 10.1016/j.powtec.2006.05.018
Wang, L. et al. Is Elevated Pressure Required to achieve a high fixed-carbon yield of charcoal from biomass? Part 1: Round-robin results for three different corncob materials. Energy Fuels 25, 3251–3265 https://doi.org/10.1021/ef200450h (2011).
Lu, H. et al. Effects of particle shape and size on devolatilization of biomass particle. Fuel 89, 1156–1168 (2010). https://doi.org/10.1016/j.fuel.2008.10.023
doi: 10.1016/j.fuel.2008.10.023
Agar, D., Demartini, N. & Hupa, M. Influence of elevated pressure on the Torrefaction of Wood. Energy and Fuels 30, 2127–2136 (2016). https://doi.org/10.1021/acs.energyfuels.5b01352
doi: 10.1021/acs.energyfuels.5b01352
Bridgwater, A. V. Review of fast pyrolysis of biomass and product upgrading. Biomass and Bioenergy 38, 68–94 (2012). https://doi.org/10.1016/j.biombioe.2011.01.048
doi: 10.1016/j.biombioe.2011.01.048
Eder, M., Terziev, N., Daniel, G. & Burgert, I. The effect of (induced) dislocations on the tensile properties of individual Norway spruce fibres. Holzforschung 62, 77–81 (2008). https://doi.org/10.1515/hf.2008.011
doi: 10.1515/hf.2008.011
Thygesen, L. G., Bilde-Sorensen, J. B. & Hoffmeyer, P. Visualisation of dislocations in hemp fibres: a comparison between scanning electron microscopy (SEM) and polarized light microscopy (PLM). Industrial Crops and Products 24, 181–185 (2006). https://doi.org/10.1016/j.indcrop.2006.03.009
doi: 10.1016/j.indcrop.2006.03.009
Thygesen, L. G. & Ander, P. Quantification of dislocations in spruce pulp and hemp fibres using polarized light microscopy and image analysis. Nordic Pulp & Paper Research Journal 20, 64–71 (2005). https://doi.org/10.3183/npprj-2005-20-01-p064-071
doi: 10.3183/npprj-2005-20-01-p064-071
Zhu, L., O’Dwyer, J. P., Chang, V. S., Granda, C. B. & Holtzapple, M. T. Structural features affecting biomass enzymatic digestibility. Bioresource Technology 99, 3817–3828 (2008). https://doi.org/10.1016/j.biortech.2007.07.033
doi: 10.1016/j.biortech.2007.07.033
pubmed: 17826088
Terziev, N., Daniel, G. & Marklund, A. Dislocations in Norway spruce fibres and their effect on properties of pulp and paper. Holzforschung 59, 163–169 (2005). https://doi.org/10.1515/hf.2005.025
doi: 10.1515/hf.2005.025
Gan, P. G., Sam, S. T., Abdullah, M. F. b. & Omar, M. F. Thermal properties of nanocellulose-reinforced composites: a review. Journal of Applied Polymer Science 137, 48544 (2020). https://doi.org/10.1002/app.48544
doi: 10.1002/app.48544
Phanphanich, M. & Mani, S. Impact of torrefaction on the grindability and fuel characteristics of forest biomass. Bioresource Technology 102, 1246–1253 (2011). https://doi.org/10.1016/j.biortech.2010.08.028
doi: 10.1016/j.biortech.2010.08.028
pubmed: 20801023
Fan, M., Ndikontar, M. K., Zhou, X. & Ngamveng, J. N. Cement-bonded composites made from tropical woods: compatibility of wood and cement. Construction and Building Materials 36, 135–140 (2012). https://doi.org/10.1016/j.conbuildmat.2012.04.089
doi: 10.1016/j.conbuildmat.2012.04.089
Jorge, F. C., Pereira, C. & Ferreira, J. M. F. Wood-cement composites: a review. Holz Als Roh-Und Werkstoff 62, 370–377 (2004). https://doi.org/10.1007/s00107-004-0501-2
doi: 10.1007/s00107-004-0501-2
Masche, M. et al. From wood chips to pellets to milled pellets: the mechanical processing pathway of Austrian pine and European beech. Powder Technology 350, 134–145 (2019). https://doi.org/10.1016/j.powtec.2019.03.002
doi: 10.1016/j.powtec.2019.03.002
Castellano, J. M., Gomez, M., Fernandez, M., Esteban, L. S. & Carrasco, J. E. Study on the effects of raw materials composition and pelletization conditions on the quality and properties of pellets obtained from different woody and non woody biomasses. Fuel 139, 629–636 (2015). https://doi.org/10.1016/j.fuel.2014.09.033
doi: 10.1016/j.fuel.2014.09.033
Nielsen, N. P. K., Gardner, D. J. & Felby, C. Effect of extractives and storage on the pelletizing process of sawdust. Fuel 89, 94–98 (2010). https://doi.org/10.1016/j.fuel.2009.06.025
doi: 10.1016/j.fuel.2009.06.025
Sheshmani, S., Ashori, A. & Farhani, F. Effect of extractives on the performance properties of wood flour-polypropylene composites. Journal of Applied Polymer Science 123, 1563–1567 (2012). https://doi.org/10.1002/app.34745
doi: 10.1002/app.34745
Das, A. K. et al. Multi-blade milling from log to powder in one step – experimental design and results. Powder Technology 378, 593–601 (2021). https://doi.org: https://doi.org/10.1016/j.powtec.2020.10.026
doi: 10.1016/j.powtec.2020.10.026
Raitanen, J.-E. et al. Tannins of Conifer Bark as Nordic Piquancy—Sustainable Preservative and Aroma? Molecules 25, 567 (2020).
doi: 10.3390/molecules25030567
pubmed: 32012956
pmcid: 7036811
Mayer-Laigle, C., Rajaonarivony, R. K., Blanc, N. & Rouau, X. Comminution of Dry Lignocellulosic Biomass: part II. Technologies, Improvement of Milling performances, and Security issues. Bioengineering 5, 50 (2018).
doi: 10.3390/bioengineering5030050
pubmed: 29932152
pmcid: 6165348
Chai, H., Xu, C., Li, J., Kong, F. & Cai, Y. Effects of pretreatment with saturated wet air and steaming on the high-frequency vacuum drying characteristics of wood. BioResources 14, 9601–9610 (2019). https://doi.org/10.15376/biores.14.4.9601-9610
Lube, V., Lazarescu, C., Mansfield, S. D. & Avramidis, S. Wood microfibril angle variation after drying. Holzforschung 70, 485–488 (2016). https://doi.org/10.1515/hf-2014-0334
doi: 10.1515/hf-2014-0334
Zanuncio, A. J. V. et al. EFFECT OF EXTRACTIVES ON WOOD COLOR OF HEAT TREATED Pinus radiata AND Eucalyptus pellita. Maderas-Ciencia Y Tecnologia 17, 857–864 (2015). https://doi.org/10.4067/s0718-221x2015005000074
doi: 10.4067/s0718-221x2015005000074
Hu, C. S., Jiang, G. F., Xiao, M., Zhou, J. H. & Yi, Z. Effects of heat treatment on water-soluble extractives and color changes of merbau heartwood. Journal of Wood Science 58, 465–469 (2012). https://doi.org/10.1007/s10086-012-1265-7
doi: 10.1007/s10086-012-1265-7
Piernik, M. et al. Impact of the Heat Treatment Duration on Color and selected mechanical and Chemical properties of scots Pine Wood. Materials 15 (2022). https://doi.org/10.3390/ma15155425
Fernando, D., Daniel, G., Liden, J. & Kraftliner, K. The state and spatial distribution of extractives during birch kraft pulping, as evaluated by staining techniques. Nordic Pulp & Paper Research Journal 20, 383–391 (2005). https://doi.org/10.3183/npprj-2005-20-04-p383-391
doi: 10.3183/npprj-2005-20-04-p383-391
Fernando, D., Hafren, J., Gustafsson, J. & Daniel, G. Micromorphology and topochemistry of extractives in scots pine and Norway spruce thermomechanical pulps: a cytochemical approach. Journal of Wood Science 54, 134–142 (2008). https://doi.org/10.1007/s10086-007-0917-5
doi: 10.1007/s10086-007-0917-5
Yang, Y., Zhang, M., Zhao, J. et al. Effects of particle size on biomass pretreatment and hydrolysis performances in bioethanol conversion. Biomass Conversion and Biorefinery 13, 13023–13036 (2023). https://doi.org/10.1007/s13399-021-02169-3
doi: 10.1007/s13399-021-02169-3
Arshadi, M., Gref, R., Geladi, P., Dahlqvist, S. A. & Lestander, T. The influence of raw material characteristics on the industrial pelletizing process and pellet quality, Fuel Process Technology 89, 1442–1447 (2008). https://doi.org/10.1016/j.fuproc.2008.07.001