S Spintzyk

Affiliations

Section "Medical Materials Science & Technology" University Hospital Tuebingen, Osianderstr. 2-8, 72076, Tuebingen, Germany.

Publications (61)

Bonding strength of 3D printed silicone and titanium retention magnets for maxillofacial prosthetics application.

Journal of prosthodontic research

Avec: Sebastian Spintzyk , Sophia Brinkmeier , Fabian Huettig , Alexey Unkovskiy

Influence of minimal extended firing on dimensional, optical, and mechanical properties of crystalized zirconia-reinforced lithium silicate glass ceramic.

Journal of the mechanical behavior of biomedical materials

Avec: Florian Schweitzer , Sebastian Spintzyk , Juergen Geis-Gerstorfer , Fabian Huettig

Postpolymerization of a 3D-printed denture base polymer: Impact of post-curing methods on surface characteristics, flexural strength, and cytotoxicity.

Journal of dentistry

Avec: Ping Li , Anna-Lena Lambart , Bogna Stawarczyk , Marcel Reymus , Sebastian Spintzyk

Repairability of a 3D printed denture base polymer: Effects of surface treatment and artificial aging on the shear bond strength.

Journal of the mechanical behavior of biomedical materials

Avec: Ping Li , Pablo Krämer-Fernandez , Andrea Klink , Yichen Xu , Sebastian Spintzyk

Bonding Interface and Repairability of 3D-Printed Intraoral Splints: Shear Bond Strength to Current Polymers, with and without Ageing.

Materials (Basel, Switzerland)

Avec: Ebru Kuscu , Andrea Klink , Sebastian Spintzyk , Pablo Kraemer Fernandez , Fabian Huettig

Rapid Additive Manufacturing of a Superlight Obturator for Large Oronasal Fistula in Pediatric Patient.

The Laryngoscope

Avec: Yichen Xu , Hanyao Huang , Min Wu , Yuting Tian , Qianbing Wan , Bing Shi , Tao Hu , Sebastian Spintzyk

Cytocompatibility of Polymers for Skin-Contact Applications Produced via Pellet Extrusion.

Journal of functional biomaterials

Avec: Sakine Deniz Varsavas , Paweł Michalec , Mohammed Khalifa , Ping Li , Sebastian Spintzyk

An In Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants.

Journal of clinical medicine

Avec: Xingting Han , Neha Sharma , Zeqian Xu , Lutz Scheideler , Jürgen Geis-Gerstorfer , Frank Rupp , Florian M Thieringer , Sebastian Spintzyk

Technical note on introducing a digital workflow for newborns with craniofacial anomalies based on intraoral scans - part II: 3D printed Tübingen palatal plate prototype for newborns with Robin sequence.

BMC oral health

Avec: A B Xepapadeas , C Weise , K Frank , S Spintzyk , C F Poets , C Wiechers , J Arand , B Koos

Retention Forces of Prosthetic Clasps over a Simulated Wearing Period of Six Years In-Vitro: Direct Metal Laser Melting Versus Dental Casting.

Materials (Basel, Switzerland)

Avec: Moritz Mutschler , Florian Schweitzer , Sebastian Spintzyk , Jürgen Geis-Gerstorfer , Fabian Huettig

Restorative CAD/CAM materials in dentistry: analysis of their fluorescence properties and the applicability of the fluorescence-aided identification technique (FIT).

Clinical oral investigations

Avec: Christian Klein , Matthias Krespach , Sebastian Spintzyk , Diana Wolff , Christiane von Ohle , Christian Meller

Food Solutions and Cigarette Smoke-Dependent Changes in Color and Surface Texture of CAD/CAM Composite Resins-An In Vitro Study.

The International journal of prosthodontics

Avec: Marcel Reymus , Anja Liebermann , Sebastian Spintzyk , Bogna Stawarczyk

Needle penetration test - qualifying examination of 3D printable silicones for vascular models in surgical practice.

3D printing in medicine

Avec: Thore von Steuben , Christoph Salewski , Alexander B Xepapadeas , Moritz Mutschler , Sebastian Spintzyk

Bonding Behavior of Conventional PMMA towards Industrial CAD/CAM PMMA and Artificial Resin Teeth for Complete Denture Manufacturing in a Digital Workflow.

Materials (Basel, Switzerland)

Avec: Dominik Klaiber , Sebastian Spintzyk , Juergen Geis-Gerstorfer , Andrea Klink , Alexey Unkovskiy , Fabian Huettig

Effects of layer thickness and build angle on the microbial adhesion of denture base polymers manufactured by digital light processing.

Journal of prosthodontic research

Avec: Ping Li , Pablo Kraemer Fernandez , Sebastian Spintzyk , Franziska Schmidt , Jamila Yassine , Florian Beuer , Alexey Unkovskiy

A balance of biocompatibility and antibacterial capability of 3D printed PEEK implants with natural totarol coating.

Dental materials : official publication of the Academy of Dental Materials

Avec: Xingting Han , Neha Sharma , Zeqian Xu , Stefanie Krajewski , Ping Li , Sebastian Spintzyk , Longwei Lv , Yongsheng Zhou , Florian M Thieringer , Frank Rupp

Implementation of a Full Digital Workflow by 3D Printing Intraoral Splints Used in Dental Education: An Exploratory Observational Study with Respect to Students' Experiences.

Dentistry journal

Avec: Pablo Kraemer-Fernandez , Sebastian Spintzyk , Ebru Wahl , Fabian Huettig , Andrea Klink

ECMO implantation training: Needle penetration in 3D printable materials and porcine aorta.

Perfusion

Avec: Christoph Salewski , Sebastian Spintzyk , Thore von Steuben , Rodrigo Sandoval Boburg , Attila Nemeth , Christine Schille , Metesh Acharya , Jürgen Geis-Gerstorfer , Hans-Peter Wendel , Aron-Frederik Popov , Christian Schlensak

Biaxial flexural strength of zirconia: A round robin test with 12 laboratories.

Dental materials : official publication of the Academy of Dental Materials

Avec: Sebastian Spintzyk , Jürgen Geis-Gerstorfer , Christoph Bourauel , Ludger Keilig , Ulrich Lohbauer , Annike Brune , Andreas Greuling , Christin Arnold , Stefan Rues , Ranko Adjiski , Tomofumi Sawada , Nina Lümkemann , Bogna Stawarczyk , Nicoleta Ilie , Roland Frankenberger , Marie-Christine Dudek , Monika Strickstrock , Sabine Begand

Additive Manufacturing: A Comparative Analysis of Dimensional Accuracy and Skin Texture Reproduction of Auricular Prostheses Replicas.

Journal of prosthodontics : official journal of the American College of Prosthodontists

Avec: Alexey Unkovskiy , Sebastian Spintzyk , Detlef Axmann , Eva-Maria Engel , Heiner Weber , Fabian Huettig

Influence of Different Cleaning Procedures on Tensile Bond Strength Between Zirconia Abutment and Titanium Base.

The International journal of oral & maxillofacial implants

Avec: Felicitas Wiedenmann , Anja Liebermann , Sebastian Spintzyk , Marlis Eichberger , Bogna Stawarczyk

Effect of slow-cooling protocol on biaxial flexural strengths of bilayered porcelain-ceria-stabilized zirconia/alumina nanocomposite (Ce-TZP/A) disks.

Dental materials : official publication of the Academy of Dental Materials

Avec: Tomofumi Sawada , Verena Wagner , Christine Schille , Sebastian Spintzyk , Ernst Schweizer , Jürgen Geis-Gerstorfer

Peel bond strength between 3D printing tray materials and elastomeric impression/adhesive systems: A laboratory study.

Dental materials : official publication of the Academy of Dental Materials

Avec: Y Xu , F Huettig , C Schille , E Schweizer , J Geis-Gerstorfer , S Spintzyk

Retentive Characteristics of a Polyetheretherketone Post-Core Restoration with Polyvinylsiloxane Attachments.

Polymers

Avec: Ping Li , Dorina Hasselbeck , Alexey Unkovskiy , Feraydoon Sharghi , Sebastian Spintzyk

3D Printing of Polyamide to Fabricate a Non-Metal Clasp Removable Partial Denture via Fused Filament Fabrication: A Case Report.

International journal of environmental research and public health

Avec: Sebastian Spintzyk , Roman Schmunk , Pablo Kraemer Fernandez , Fabian Huettig , Alexey Unkovskiy

Multi-Material 3D Printing of a Customized Sports Mouth Guard: Proof-of-Concept Clinical Case.

International journal of environmental research and public health

Avec: Alexey Unkovskiy , Fabian Huettig , Pablo Kraemer-Fernandez , Sebastian Spintzyk

The impact of 3D printed models on spatial orientation in echocardiography teaching.

BMC medical education

Avec: Christoph Salewski , Attila Nemeth , Rodrigo Sandoval Boburg , Rafal Berger , Hasan Hamdoun , Hannes Frenz , Sebastian Spintzyk , Julia Kelley Hahn , Christian Schlensak , Tobias Krüger

Dimensional Stability of Additively Manufactured Dentate Maxillary Diagnostic Casts in Biobased Model Resin.

Materials (Basel, Switzerland)

Avec: Münir Demirel , Almira Ada Diken Türksayar , Sandra Petersmann , Sebastian Spintzyk , Mustafa Borga Donmez

The effect of thermomechanical aging on the fracture resistance of additive and subtractive manufactured polyetheretherketone abutments.

Journal of dentistry

Avec: Almira Ada Diken Türksayar , Sandra Petersmann , Sebastian Spintzyk

Post-processing of a 3D-printed denture base polymer: Impact of a centrifugation method on the surface characteristics, flexural properties, and cytotoxicity.

Journal of dentistry

Avec: Jingtao Dai , Ke Luo , Qian Liu , Alexey Unkovskiy , Sebastian Spintzyk , Shulan Xu , Ping Li

Trueness and precision of skin surface reproduction in digital workflows for facial prosthesis fabrication.

The Journal of prosthetic dentistry

Avec: Alexey Unkovskiy , Sebastian Spintzyk , Tobias Kiemle , Ariadne Roehler , Fabian Huettig

Surface Characteristics of Milled and 3D Printed Denture Base Materials Following Polishing and Coating: An In-Vitro Study.

Materials (Basel, Switzerland)

Avec: Pablo Kraemer Fernandez , Alexey Unkovskiy , Viola Benkendorff , Andrea Klink , Sebastian Spintzyk

Multimaterial 3D printing of a definitive silicone auricular prosthesis: An improved technique.

The Journal of prosthetic dentistry

Avec: Alexey Unkovskiy , Eugen Wahl , Fabian Huettig , Constanze Keutel , Sebastian Spintzyk

Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications.

Journal of clinical medicine

Avec: Xingting Han , Dong Yang , Chuncheng Yang , Sebastian Spintzyk , Lutz Scheideler , Ping Li , Dichen Li , Jürgen Geis-Gerstorfer , Frank Rupp

Intraoral scanning to fabricate complete dentures with functional borders: a proof-of-concept case report.

BMC oral health

Avec: Alexey Unkovskiy , Eugen Wahl , Anne Teresa Zander , Fabian Huettig , Sebastian Spintzyk

The Effect of Various Plasma Gases on the Shear Bond Strength between Unfilled Polyetheretherketone (PEEK) and Veneering Composite Following Artificial Aging.

Materials (Basel, Switzerland)

Avec: Mohamed Younis , Alexey Unkovskiy , Ashraf ElAyouti , Jürgen Geis-Gerstorfer , Sebastian Spintzyk

Nine prophylactic polishing pastes: impact on discoloration, gloss, and surface properties of a CAD/CAM resin composite.

Clinical oral investigations

Avec: Anja Liebermann , Sebastian Spintzyk , Marcel Reymus , Ernst Schweizer , Bogna Stawarczyk

Fracture Load of an Orthodontic Appliance for Robin Sequence Treatment in a Digital Workflow.

Materials (Basel, Switzerland)

Avec: Maite Aretxabaleta , Alexander B Xepapadeas , Christian F Poets , Bernd Koos , Sebastian Spintzyk

Mechanical and optical properties of indirect veneering resin composites after different aging regimes.

Dental materials journal

Avec: Bogna Stawarczyk , Michael Brauneis , Benedikt Langwieder , Sebastian Spintzyk , Marlis Eichberger , Anja Liebermann

Rapid additive manufacturing of an obturator prosthesis with the use of an intraoral scanner: A dental technique.

The Journal of prosthetic dentistry

Avec: Pablo Krämer Fernandez , Ebru Kuscu , Hannes Weise , Eva M Engel , Sebastian Spintzyk

Impact of sterilization treatments on biodegradability and cytocompatibility of zinc-based implant materials.

Materials science & engineering. C, Materials for biological applications

Avec: Ping Li , Wentai Zhang , Sebastian Spintzyk , Ernst Schweizer , Stefanie Krajewski , Dorothea Alexander , Jingtao Dai , Shulan Xu , Guojiang Wan , Frank Rupp

Accuracy of capturing nasal, orbital, and auricular defects with extra- and intraoral optical scanners and smartphone: An in vitro study.

Journal of dentistry

Avec: Alexey Unkovskiy , Sebastian Spintzyk , Florian Beuer , Fabian Huettig , Ariadne Röhler , Pablo Kraemer-Fernandez

Fracture toughness of 3Y-TZP ceramic measured by the Chevron-Notch Beam method: A round-robin study.

Dental materials : official publication of the Academy of Dental Materials

Avec: Sabine Begand , Sebastian Spintzyk , Jürgen Geis-Gerstorfer , Christoph Bourauel , Ludger Keilig , Ulrich Lohbauer , Christin Worpenberg , Andreas Greuling , Ranko Adjiski , Klaus D Jandt , Nina Lümkemann , Bogna Stawarczyk , André Güllmar , Andreas Kailer , Natalie Oberle , Marc Stephan

Post-processing of DLP-printed denture base polymer: Impact of a protective coating on the surface characteristics, flexural properties, cytotoxicity, and microbial adhesion.

Dental materials : official publication of the Academy of Dental Materials

Avec: Jingtao Dai , Ke Luo , Sebastian Spintzyk , Alexey Unkovskiy , Ping Li , Shulan Xu , Pablo Kraemer Fernandez

Adhesive Property of 3D-Printed PEEK Abutments: Effects of Surface Treatment and Temporary Crown Material on Shear Bond Strength.

Journal of functional biomaterials

Avec: Dingjie Wang , Xingting Han , Feng Luo , Florian M Thieringer , Yichen Xu , Guomin Ou , Sebastian Spintzyk

Technical note on introducing a digital workflow for newborns with craniofacial anomalies based on intraoral scans - part I: 3D printed and milled palatal stimulation plate for trisomy 21.

BMC oral health

Avec: Alexander B Xepapadeas , Christina Weise , K Frank , S Spintzyk , C F Poets , C Wiechers , J Arand , B Koos

Simplifying the digital workflow of facial prostheses manufacturing using a three-dimensional (3D) database: setup, development, and aspects of virtual data validation for reproduction.

Journal of prosthodontic research

Avec: Alexey Unkovskiy , Ariadne Roehler , Fabian Huettig , Juergen Geis-Gerstorfer , Joern Brom , Constanze Keutel , Sebastian Spintzyk

Effect of additive manufacturing method and build angle on surface characteristics and Candida albicans adhesion to 3D printed denture base polymers.

Journal of dentistry

Avec: Ping Li , Pablo Kraemer Fernandez , Sebastian Spintzyk , Franziska Schmidt , Florian Beuer , Alexey Unkovskiy

A virtual patient concept for esthetic and functional rehabilitation in a fully digital workflow.

International journal of computerized dentistry

Avec: Alexey Unkovskiy , Natalia Unkovskiy , Sebastian Spintzyk

Stereolithography vs. Direct Light Processing for Rapid Manufacturing of Complete Denture Bases: An In Vitro Accuracy Analysis.

Journal of clinical medicine

Avec: Alexey Unkovskiy , Franziska Schmidt , Florian Beuer , Ping Li , Sebastian Spintzyk , Pablo Kraemer Fernandez

Effect of post-rinsing time on the mechanical strength and cytotoxicity of a 3D printed orthodontic splint material.

Dental materials : official publication of the Academy of Dental Materials

Avec: Yichen Xu , Alexander B Xepapadeas , Bernd Koos , Jürgen Geis-Gerstorfer , Ping Li , Sebastian Spintzyk

Tailoring the biologic responses of 3D printed PEEK medical implants by plasma functionalization.

Dental materials : official publication of the Academy of Dental Materials

Avec: Xingting Han , Neha Sharma , Sebastian Spintzyk , Yongsheng Zhou , Zeqian Xu , Florian M Thieringer , Frank Rupp

Development of Personalized Non-Invasive Ventilation Interfaces for Neonatal and Pediatric Application Using Additive Manufacturing.

Journal of personalized medicine

Avec: Marit Bockstedte , Alexander B Xepapadeas , Sebastian Spintzyk , Christian F Poets , Bernd Koos , Maite Aretxabaleta

Shock Absorption Behavior of Elastic Polymers for Sports Mouthguards: An In Vitro Comparison of Thermoplastic Forming and Additive Manufacturing.

Materials (Basel, Switzerland)

Avec: Philipp Schewe , Ariadne Roehler , Sebastian Spintzyk , Fabian Huettig

Accuracy Evaluation of Additively and Subtractively Fabricated Palatal Plate Orthodontic Appliances for Newborns and Infants-An In Vitro Study.

Materials (Basel, Switzerland)

Avec: Maite Aretxabaleta , Alexey Unkovskiy , Bernd Koos , Sebastian Spintzyk , Alexander B Xepapadeas

Needle Penetration Simulation: Influence of Penetration Angle and Sample Stress on the Mechanical Behaviors of Polymers Applying a Cast Silicone and a 3D-Printed Resin.

Materials (Basel, Switzerland)

Avec: Thore von Steuben , Florian K Enzmann , Sebastian Spintzyk , Frank Rupp , Ariadne Roehler

Rinsing postprocessing procedure of a 3D-printed orthodontic appliance material: Impact of alternative post-rinsing solutions on the roughness, flexural strength and cytotoxicity.

Dental materials : official publication of the Academy of Dental Materials

Avec: Anna-Lena Lambart , Alexander B Xepapadeas , Bernd Koos , Ping Li , Sebastian Spintzyk

Three-Dimensional Printed Tooth Model with Root Canal Ledge: A Novel Educational Tool for Endodontic Training.

Dentistry journal

Avec: Rui Zhang , Renjie Tang , Sebastian Spintzyk , Yuting Tian , Yong Xiang , Yichen Xu , Tao Hu

Influence of additive manufacturing method and build angle on the accuracy of 3D-printed palatal plates.

Journal of dentistry

Avec: Jingtao Dai , Ping Li , Sebastian Spintzyk , Chufeng Liu , Shulan Xu

Positional accuracy of a single implant analog in additively manufactured casts in biobased model resin.

Journal of dentistry

Avec: Almira Ada Diken Türksayar , Münir Demirel , Sandra Petersmann , Sebastian Spintzyk , Mustafa Borga Donmez

Conventionally and digitally fabricated removable complete dentures: manufacturing accuracy, fracture resistance and repairability.

Dental materials : official publication of the Academy of Dental Materials

Avec: Adrian Zahel , Ariadne Roehler , Pablo Kaucher-Fernandez , Sebastian Spintzyk , Frank Rupp , Eva Engel

Réseau de co-auteurs

Sebastian Spintzyk 58 collaborations

Alexey Unkovskiy 20 collaborations

Fabian Huettig 15 collaborations

Ping Li 15 collaborations

Jürgen Geis-Gerstorfer 9 collaborations

Bogna Stawarczyk 7 collaborations

Pablo Kraemer Fernandez 7 collaborations

Frank Rupp 7 collaborations

Alexander B Xepapadeas 7 collaborations

Andrea Klink 5 collaborations

Yichen Xu 5 collaborations

Xingting Han 5 collaborations

Ariadne Roehler 5 collaborations

Bernd Koos 5 collaborations

Florian M Thieringer 4 collaborations

Anja Liebermann 4 collaborations

Florian Beuer 4 collaborations

Jingtao Dai 4 collaborations

Shulan Xu 4 collaborations

Juergen Geis-Gerstorfer 3 collaborations

Marcel Reymus 3 collaborations

Neha Sharma 3 collaborations

Zeqian Xu 3 collaborations

Thore von Steuben 3 collaborations

Christoph Salewski 3 collaborations

Franziska Schmidt 3 collaborations

Pablo Kraemer-Fernandez 3 collaborations

Ernst Schweizer 3 collaborations

Almira Ada Diken Türksayar 3 collaborations

Sandra Petersmann 3 collaborations

Maite Aretxabaleta 3 collaborations

Florian Schweitzer 2 collaborations

Anna-Lena Lambart 2 collaborations

Ebru Kuscu 2 collaborations

Yuting Tian 2 collaborations

Tao Hu 2 collaborations

Lutz Scheideler 2 collaborations

K Frank 2 collaborations

C F Poets 2 collaborations

C Wiechers 2 collaborations

J Arand 2 collaborations

B Koos 2 collaborations

Moritz Mutschler 2 collaborations

Stefanie Krajewski 2 collaborations

Yongsheng Zhou 2 collaborations

Rodrigo Sandoval Boburg 2 collaborations

Attila Nemeth 2 collaborations

Christine Schille 2 collaborations

Christian Schlensak 2 collaborations

Christoph Bourauel 2 collaborations

Ludger Keilig 2 collaborations

Ulrich Lohbauer 2 collaborations

Andreas Greuling 2 collaborations

Ranko Adjiski 2 collaborations

Tomofumi Sawada 2 collaborations

Nina Lümkemann 2 collaborations

Sabine Begand 2 collaborations

Marlis Eichberger 2 collaborations

Münir Demirel 2 collaborations

Mustafa Borga Donmez 2 collaborations

Ke Luo 2 collaborations

Eugen Wahl 2 collaborations

Constanze Keutel 2 collaborations

Christian F Poets 2 collaborations

Sophia Brinkmeier 1 collaboration

Pablo Krämer-Fernandez 1 collaboration

Hanyao Huang 1 collaboration

Min Wu 1 collaboration

Qianbing Wan 1 collaboration

Bing Shi 1 collaboration

Sakine Deniz Varsavas 1 collaboration

Paweł Michalec 1 collaboration

Mohammed Khalifa 1 collaboration

A B Xepapadeas 1 collaboration

C Weise 1 collaboration

Christian Klein 1 collaboration

Matthias Krespach 1 collaboration

Diana Wolff 1 collaboration

Christiane von Ohle 1 collaboration

Christian Meller 1 collaboration

Dominik Klaiber 1 collaboration

Jamila Yassine 1 collaboration

Longwei Lv 1 collaboration

Ebru Wahl 1 collaboration

Metesh Acharya 1 collaboration

Hans-Peter Wendel 1 collaboration

Aron-Frederik Popov 1 collaboration

Annike Brune 1 collaboration

Christin Arnold 1 collaboration

Stefan Rues 1 collaboration

Nicoleta Ilie 1 collaboration

Roland Frankenberger 1 collaboration

Marie-Christine Dudek 1 collaboration

Monika Strickstrock 1 collaboration

Detlef Axmann 1 collaboration

Eva-Maria Engel 1 collaboration

Heiner Weber 1 collaboration

Felicitas Wiedenmann 1 collaboration

Verena Wagner 1 collaboration

Y Xu 1 collaboration

F Huettig 1 collaboration

C Schille 1 collaboration

E Schweizer 1 collaboration

J Geis-Gerstorfer 1 collaboration

Dorina Hasselbeck 1 collaboration

Feraydoon Sharghi 1 collaboration

Roman Schmunk 1 collaboration

Rafal Berger 1 collaboration

Hasan Hamdoun 1 collaboration

Hannes Frenz 1 collaboration

Julia Kelley Hahn 1 collaboration

Tobias Krüger 1 collaboration

Qian Liu 1 collaboration

Tobias Kiemle 1 collaboration

Viola Benkendorff 1 collaboration

Dong Yang 1 collaboration

Chuncheng Yang 1 collaboration

Dichen Li 1 collaboration

Anne Teresa Zander 1 collaboration

Mohamed Younis 1 collaboration

Ashraf ElAyouti 1 collaboration

Michael Brauneis 1 collaboration

Benedikt Langwieder 1 collaboration

Pablo Krämer Fernandez 1 collaboration

Hannes Weise 1 collaboration

Eva M Engel 1 collaboration

Wentai Zhang 1 collaboration

Dorothea Alexander 1 collaboration

Guojiang Wan 1 collaboration

Ariadne Röhler 1 collaboration

Christin Worpenberg 1 collaboration

Klaus D Jandt 1 collaboration

André Güllmar 1 collaboration

Andreas Kailer 1 collaboration

Natalie Oberle 1 collaboration

Marc Stephan 1 collaboration

Dingjie Wang 1 collaboration

Feng Luo 1 collaboration

Guomin Ou 1 collaboration

Christina Weise 1 collaboration

Joern Brom 1 collaboration

Natalia Unkovskiy 1 collaboration

Marit Bockstedte 1 collaboration

Philipp Schewe 1 collaboration

Florian K Enzmann 1 collaboration

Rui Zhang 1 collaboration

Renjie Tang 1 collaboration

Yong Xiang 1 collaboration

Chufeng Liu 1 collaboration

Adrian Zahel 1 collaboration

Pablo Kaucher-Fernandez 1 collaboration

Eva Engel 1 collaboration